« previous next »
Pages: [1]   Go Down

Author Topic: Engaging L gear  (Read 4270 times)

Offline foofam77

  • Low End (2000 rpm)
  • **
  • Posts: 369
Engaging L gear
« on: January 17, 2010, 10:59:12 AM »
how would you engage L gear?

do you engage L gear when the car is stationery (from P), or when the car is in motion (from D)?

thanks
Logged

Offline alex

  • Idling (800 rpm)
  • *
  • Posts: 76
Re: Engaging L gear
« Reply #1 on: January 17, 2010, 02:51:22 PM »
Hi,

I will use L gear when i am climbing slope on D.
When there not enought power.

Or coming down a long slope, as i don want to over heat my brake.
Use L gear as engine brake.

To change to L from D, please make sure your Latio is at very slow speed 20 to 30 KM/h.
As changing to L from D, from high speed will actually spoilt your transmission.

Hope it help
Logged

Offline SoL

  • Low End (2000 rpm)
  • **
  • Posts: 219
Re: Engaging L gear
« Reply #2 on: January 17, 2010, 03:23:35 PM »
When going up steep slopes, I just depress the pedal more, downshift is automatic.

I agree with the rest you said though.  :thumbsup:
Logged

Offline nakshire

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 854
  • I'm a cute boy ok!
Re: Engaging L gear
« Reply #3 on: January 17, 2010, 06:18:14 PM »
Quote from: SoL on January 17, 2010, 03:23:35 PM
When going up steep slopes, I just depress the pedal more, downshift is automatic.

I agree with the rest you said though.  :thumbsup:

yes, press the pedal more. Its the same effect.

agreed on the high speed change gear too...
Logged

Offline fickle

  • Idling (800 rpm)
  • *
  • Posts: 88
Re: Engaging L gear
« Reply #4 on: January 20, 2010, 10:31:06 PM »
i just used it today... when i was going down the multistorey car park... 
Logged

Offline clarence

  • Max Torque (4400 rpm)
  • ****
  • Posts: 1,579
Re: Engaging L gear
« Reply #5 on: January 21, 2010, 02:22:56 AM »
Quote from: fickle on January 20, 2010, 10:31:06 PM
i just used it today... when i was going down the multistorey car park... 


Did you feel the engine brake at work?
Logged

Offline SoL

  • Low End (2000 rpm)
  • **
  • Posts: 219
Re: Engaging L gear
« Reply #6 on: January 21, 2010, 08:07:26 PM »
Quote from: clarence on January 21, 2010, 02:22:56 AM

Did you feel the engine brake at work?

L gear engine brake limit speed to around 30km/h at most, for me on 4AT.

If you go down MSCP at 10km/h, you won't feel the engine brake i.e no difference between L and D.
Try it on a steeper slope, and you'll really feel the effect.
Logged

Offline alex

  • Idling (800 rpm)
  • *
  • Posts: 76
Re: Engaging L gear
« Reply #7 on: January 22, 2010, 12:58:47 PM »
Bro,

There no diff in Singapore multi story car park.
Cos not steep enough la.

You may try at the industrial type multi story.
Which you may have to travel down from Level 8 to level 1 all the way.
eg: Woodland Spectrum, toh guan or Yishun YS one building type.
Which have a circular ramp type.

Or try it out at Mt Faber la.

You will learn to appreciate L gear.
Regards
Logged
Pages: [1]   Go Up
« previous next »