Author Topic: Ikey not sensitive  (Read 4061 times)

Offline CamholicX

  • Redline (6000 rpm)
  • ******
  • Posts: 10,032
Ikey not sensitive
« on: July 11, 2010, 09:52:48 PM »
Nowadays to lock or unlock the door have to stand very near to the door. And inside car, the key always cant be detected.

Change my batt in the ikey but still same. Any idea ?

Offline Silver

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 900
Re: Ikey not sensitive
« Reply #1 on: July 11, 2010, 09:59:23 PM »
topic was discussed before

any case, check the wire connection behind the in-cabin rear view mirror
Be safe. Go with the flo.

Offline CamholicX

  • Redline (6000 rpm)
  • ******
  • Posts: 10,032
Re: Ikey not sensitive
« Reply #2 on: July 11, 2010, 10:06:44 PM »
if wire not connected properly then it will totally cant detect rite ..

Offline Silver

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 900
Re: Ikey not sensitive
« Reply #3 on: July 11, 2010, 10:21:40 PM »
the connection may be loose
Be safe. Go with the flo.

Offline fri13th

  • Low End (2000 rpm)
  • **
  • Posts: 183
Re: Ikey not sensitive
« Reply #4 on: July 19, 2010, 10:42:09 PM »
Nowadays to lock or unlock the door have to stand very near to the door. And inside car, the key always cant be detected.

Change my batt in the ikey but still same. Any idea ?
u can try changing ur 1key batt....can get at those cheap cheap store should only cost about $1.50

Offline nakshire

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 854
  • I'm a cute boy ok!
Re: Ikey not sensitive
« Reply #5 on: July 20, 2010, 12:05:12 AM »
no need buy la... i have a lot of those batteries... usually i give them out on meet ups. haha

Offline CamholicX

  • Redline (6000 rpm)
  • ******
  • Posts: 10,032
Re: Ikey not sensitive
« Reply #6 on: July 20, 2010, 07:50:56 AM »
I change liao but still same.

Offline vortex

  • Low End (2000 rpm)
  • **
  • Posts: 297
Re: Ikey not sensitive
« Reply #7 on: July 20, 2010, 10:30:28 AM »
If the ikey is kept inside a bag, or pockets, it may not be able to sense it. Maybe also if put togerther with the phone, could have interferrence from the phone signal.

Offline Ender

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 452
Re: Ikey not sensitive
« Reply #8 on: August 12, 2010, 05:21:07 PM »
The last time it happen to me was when the CAR battery was dying..  I find it strange how press the button a few times then it unlock. Then next day, cannot start engine.