Author Topic: DIY door lining to reduce wind noise: who's interested?  (Read 198397 times)

Offline ashocker

  • Idling (800 rpm)
  • *
  • Posts: 113
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #180 on: January 04, 2007, 04:57:23 PM »
wah bro. now then u do it up ah.  :D anyway, glad to hear that u're enjoying the effects.  ;) The lining should season out after 1-2 weeks then the doors will be easier to close then.
heehee, no choice leh, been working + rainy season lately :)
Am happy to say that it passed the weather test last nite!  :thumbsup:
So far door have not been giving too much problem. In fact quite happy coz of the solid "thud" sound when closing :D

Offline xmustang74

  • Idling (800 rpm)
  • *
  • Posts: 129
  • May the force be with you......
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #181 on: January 04, 2007, 05:07:16 PM »
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k? 

1. Revin81
2. alezis 

These are the people who have allocated their interest. Prices still at $10 

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
The only way to get rid of a temptation is to yield to it.
Do, or do not. There is no 'try'.

laguna968

  • Guest
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #182 on: January 04, 2007, 05:39:28 PM »
Hi Corgan,

I saw the pics NSman posted.  He seem to put the strip at a different place then you.  He put directly on the rubber lining, whereas you put on the metal part of the body.  I a bit confused, so which one is correct huh??  :confused1:

Offline corgan

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,246
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #183 on: January 04, 2007, 06:10:54 PM »
Hi Corgan,

I saw the pics NSman posted.  He seem to put the strip at a different place then you.  He put directly on the rubber lining, whereas you put on the metal part of the body.  I a bit confused, so which one is correct huh??  :confused1:

all are correct.  :D depends on u where u like it. effect shld be roughly the same cos the main purpose is to aid the rubber seal in sealing the doors. ;) His method looks nicer but since ur car is black in colour, i dun think it will make much difference.  :D


My ICE journey so far - Pioneer P80RS - Morel Supremo Piccolo Tweeters - Morel Elate Midbass - Butler 475 - OZ vector 3 12" sub - Alpine MRP650 - MIT EXp2 Interconnects

Offline pest11

  • Low End (2000 rpm)
  • **
  • Posts: 173
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #184 on: January 04, 2007, 09:15:56 PM »
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k? 

1. Revin81
2. alezis 

These are the people who have allocated their interest. Prices still at $10 

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)

Offline corgan

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,246
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #185 on: January 05, 2007, 12:42:48 AM »
Hi everyone. Once the no of ppl who are interested hits 10, I will go down and get the material.  ;) prices will still remain at $10  :thumbsup:


My ICE journey so far - Pioneer P80RS - Morel Supremo Piccolo Tweeters - Morel Elate Midbass - Butler 475 - OZ vector 3 12" sub - Alpine MRP650 - MIT EXp2 Interconnects

toniwong

  • Guest
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #186 on: January 05, 2007, 12:31:42 PM »
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k? 

1. Revin81
2. alezis 

These are the people who have allocated their interest. Prices still at $10 

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)

Offline GKF

  • Cool Engine (0 rpm)
  • Posts: 47
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #187 on: January 05, 2007, 06:13:50 PM »
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?

1. Revin81
2. alezis

These are the people who have allocated their interest. Prices still at $10

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)


Thanks.

Offline corgan

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,246
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #188 on: January 06, 2007, 03:00:12 AM »
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?

1. alezis

These are the people who have allocated their interest. Prices still at $10   :thumbsup:

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)


Thanks.


My ICE journey so far - Pioneer P80RS - Morel Supremo Piccolo Tweeters - Morel Elate Midbass - Butler 475 - OZ vector 3 12" sub - Alpine MRP650 - MIT EXp2 Interconnects

Offline Latio2000

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 450
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #189 on: January 07, 2007, 01:27:08 PM »
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?

1. alezis

These are the people who have allocated their interest. Prices still at $10   :thumbsup:

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)


Thanks.
May need your advise how to do it sui sui ya  :smile:
Thanks in advance.

revin81

  • Guest
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #190 on: January 08, 2007, 02:57:01 AM »
Hi corgan, Managed to squeeze out some time to do it today. I hid it between the rubber and the frame, so that it looks like it's part of the rubber. However, I don't know if it's as effective as your method and carmodz. Wanna do a test? give me a call if you wanna check it out.

Offline corgan

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,246
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #191 on: January 08, 2007, 03:18:24 AM »
Hi corgan, Managed to squeeze out some time to do it today. I hid it between the rubber and the frame, so that it looks like it's part of the rubber. However, I don't know if it's as effective as your method and carmodz. Wanna do a test? give me a call if you wanna check it out.

it should be effective bro. no need to test la.  :D as long you feel an improvement compared to last time, means the lining is doing its job.  :thumbsup: give it a go on the HW, thats when the most improvement can be felt.  ;)


My ICE journey so far - Pioneer P80RS - Morel Supremo Piccolo Tweeters - Morel Elate Midbass - Butler 475 - OZ vector 3 12" sub - Alpine MRP650 - MIT EXp2 Interconnects

Offline corgan

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,246
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #192 on: January 08, 2007, 03:19:48 AM »
May need your advise how to do it sui sui ya  :smile:
Thanks in advance.

no problem bro.  ;)


My ICE journey so far - Pioneer P80RS - Morel Supremo Piccolo Tweeters - Morel Elate Midbass - Butler 475 - OZ vector 3 12" sub - Alpine MRP650 - MIT EXp2 Interconnects

Offline corgan

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,246
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #193 on: January 08, 2007, 03:21:44 AM »
These are the people who have indicated their interest. Prices still at $10     :thumbsup:

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)


Will go buy the lining once the number of people interested hits 10.  ;)


My ICE journey so far - Pioneer P80RS - Morel Supremo Piccolo Tweeters - Morel Elate Midbass - Butler 475 - OZ vector 3 12" sub - Alpine MRP650 - MIT EXp2 Interconnects

Offline NotYetz

  • Low End (2000 rpm)
  • **
  • Posts: 210
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #194 on: January 08, 2007, 05:17:33 AM »
I'll be no. 10 then!  :D

=======================================================

These are the people who have indicated their interest. Prices still at $10     :thumbsup:

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)
10. NotYetz


Offline corgan

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,246
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #195 on: January 08, 2007, 01:10:35 PM »
I'll be no. 10 then!  :D

=======================================================

These are the people who have indicated their interest. Prices still at $10     :thumbsup:

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)
10. NotYetz

okiez! I'll head down to get the lining. Will update once I get it.  ;)  For those who still wants, just add ur name down k? I'll probably buy 2-3 extra this time round.


My ICE journey so far - Pioneer P80RS - Morel Supremo Piccolo Tweeters - Morel Elate Midbass - Butler 475 - OZ vector 3 12" sub - Alpine MRP650 - MIT EXp2 Interconnects

Offline sstar

  • Idling (800 rpm)
  • *
  • Posts: 74
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #196 on: January 08, 2007, 04:38:36 PM »
These are the people who have indicated their interest. Prices still at $10     

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)
10. NotYetz
11. sstar   97607986

Offline redman

  • Low End (2000 rpm)
  • **
  • Posts: 246
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #197 on: January 09, 2007, 07:55:46 PM »
These are the people who have indicated their interest. Prices still at $10     

1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)
10. NotYetz
11. sstar   97607986
12. redman 91443044

Offline corgan

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,246
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #198 on: January 09, 2007, 07:57:21 PM »
Hi people. I have bought the lining already so all those who have indicated their interest have their lining reserved for them.  ;) watch this space again for details on meetup to collect the lining.  ;) Still got some spares so just leave ur name down if u wan k?  :D


My ICE journey so far - Pioneer P80RS - Morel Supremo Piccolo Tweeters - Morel Elate Midbass - Butler 475 - OZ vector 3 12" sub - Alpine MRP650 - MIT EXp2 Interconnects

Offline corgan

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,246
Re: DIY door lining to reduce wind noise: who's interested?
« Reply #199 on: January 09, 2007, 07:58:25 PM »
Alan, how come u need another one leh?  :confused1:


My ICE journey so far - Pioneer P80RS - Morel Supremo Piccolo Tweeters - Morel Elate Midbass - Butler 475 - OZ vector 3 12" sub - Alpine MRP650 - MIT EXp2 Interconnects