« previous next »
Pages: [1] 2   Go Down

Author Topic: Side Strip to Protect Latio from Dents  (Read 14679 times)

Offline clarence

  • Max Torque (4400 rpm)
  • ****
  • Posts: 1,579
Side Strip to Protect Latio from Dents
« on: July 06, 2008, 05:58:51 PM »
Anyone knows where I can get this installed?

About how much does it cost?

Latio is very prone to dents from motorists who are inconsiderate in opening their car doors.
Logged

Offline machim

  • Low End (2000 rpm)
  • **
  • Posts: 208
Re: Side Strip to Protect Latio from Dents
« Reply #1 on: July 06, 2008, 10:13:48 PM »
Difficult bro, I observed that door of different vehicles can hit our latio as different height, some higher and some lower. If I'm not wrong, no sure way to protect our car from these variety of doors.

You can try to prevent normal sedan car door but may not able to prevent door of higher height such as SUV or Lorry.
Logged

HumbleCar

  • Guest
Re: Side Strip to Protect Latio from Dents
« Reply #2 on: July 06, 2008, 10:16:07 PM »
Don't waste the money.  Not effective.  May improve the look only (based on individual's preference as some find it ugly).
Logged

Offline Jazz

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,097
Re: Side Strip to Protect Latio from Dents
« Reply #3 on: July 06, 2008, 10:58:23 PM »
Usually my door handle kena.  :(
Logged

Offline NSman

  • High End (5000 rpm)
  • *****
  • Posts: 3,824
  • :[踢踏e族]:
Re: Side Strip to Protect Latio from Dents
« Reply #4 on: July 06, 2008, 11:48:56 PM »
Maybe this will helps..................




Logged
"We, the La-tions of Sillypore,
Pledge ourselves as one United Road-User,
Regardless of Bhp, NA or TurboCharged,
To Build a LTA-less Society,
Based on Modifications and No TP,
So as to Acheive Roadhog Elimination, No ERP and
Automotive Progress for our Nation."

Offline Jazz

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,097
Re: Side Strip to Protect Latio from Dents
« Reply #5 on: July 07, 2008, 12:22:42 AM »
Quote from: NSman on July 06, 2008, 11:48:56 PM
Maybe this will helps..................






Very funny.  :D
Logged

Offline wonglpnn

  • Low End (2000 rpm)
  • **
  • Posts: 150
Re: Side Strip to Protect Latio from Dents
« Reply #6 on: July 07, 2008, 12:34:32 AM »
Quote from: NSman on July 06, 2008, 11:48:56 PM
Maybe this will helps..................





haha...might as well drive a tank
Logged
if u can't convince urself,how u confuse others?

Offline limck007

  • Moderators
  • Mid Zone (3000 rpm)
  • *
  • Posts: 1,016
Re: Side Strip to Protect Latio from Dents
« Reply #7 on: July 07, 2008, 09:48:26 AM »
hmmm looks like the car kanna chicken pox leh hhaha

Damn it..yesterday i scratch my car at the bumper......Got 1 scratch (black black) one liao.....

Got any protection devices for bumpers???
Logged

Offline darrylker

  • Low End (2000 rpm)
  • **
  • Posts: 383
Re: Side Strip to Protect Latio from Dents
« Reply #8 on: July 07, 2008, 12:20:02 PM »
Quote from: NSman on July 06, 2008, 11:48:56 PM
Maybe this will helps..................






Kaoz! Is this for real?  :blink: Imagine the  attention received if crusing along orchard road!  :scared:
Logged

Offline darrylker

  • Low End (2000 rpm)
  • **
  • Posts: 383
Re: Side Strip to Protect Latio from Dents
« Reply #9 on: July 07, 2008, 12:22:52 PM »
Quote from: limck007 on July 07, 2008, 09:48:26 AM
hmmm looks like the car kanna chicken pox leh hhaha

Damn it..yesterday i scratch my car at the bumper......Got 1 scratch (black black) one liao.....

Got any protection devices for bumpers???

Bro, think you have a bottle of touch-up paint from TCM, can use that to cover your scratch. Protection devices I do see one of those at DIY stores under the car section, but personally think quite ugly to paste it on all 4 corners of our bumpers... :blink:
Logged

Offline darrylker

  • Low End (2000 rpm)
  • **
  • Posts: 383
Re: Side Strip to Protect Latio from Dents
« Reply #10 on: July 07, 2008, 12:25:31 PM »
Quote from: Jazz on July 06, 2008, 10:58:23 PM
Usually my door handle kena.  :(

Same here bro...even though I always put in effort to park at corner lot & away from SUVs, lorries, etc...already has quite a few chip-off from my door handle, not even scratches that wax abit can go off....really wonder how some people have to open doors so forcefully... :mad:
Logged

Offline shpesft

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 1,671
  • I strive hard to maintain my figure...
Re: Side Strip to Protect Latio from Dents
« Reply #11 on: July 07, 2008, 05:31:16 PM »
Quote from: darrylker on July 07, 2008, 12:20:02 PM
Kaoz! Is this for real?  :blink: Imagine the  attention received if crusing along orchard road!  :scared:

Yup... This guy's for real... Certain forumers in another forum aim to spot this guy... FYI, his bodykit is actually made up of cardboard sprayed to his car colour :blink: :bleh: :devil2:
Logged
Never leave till tomorrow what you can eat today- Jim Davis aka Garfield

Offline Silver

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 900
Re: Side Strip to Protect Latio from Dents
« Reply #12 on: July 07, 2008, 05:38:54 PM »
Quote from: shpesft on July 07, 2008, 05:31:16 PM
Yup... This guy's for real... Certain forumers in another forum aim to spot this guy... FYI, his bodykit is actually made up of cardboard sprayed to his car colour :blink: :bleh: :devil2:



singapore got sunflower scooter and flower bicycle
now got polka dot car
what will they think of next?
wonder how he wash his car leh?
Logged
Be safe. Go with the flo.

Offline Jazz

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,097
Re: Side Strip to Protect Latio from Dents
« Reply #13 on: July 07, 2008, 07:31:56 PM »
Quote from: darrylker on July 07, 2008, 12:25:31 PM
Same here bro...even though I always put in effort to park at corner lot & away from SUVs, lorries, etc...already has quite a few chip-off from my door handle, not even scratches that wax abit can go off....really wonder how some people have to open doors so forcefully... :mad:

I also touch up until sian. It not they open their door forcefully, they dunno how to control the door spring effect. Sheesh.  :crying:
Logged

Offline xuan511

  • Low End (2000 rpm)
  • **
  • Posts: 279
  • Latio is a good car
Re: Side Strip to Protect Latio from Dents
« Reply #14 on: July 08, 2008, 09:24:57 AM »
Eh bros is the touch up paint in the boot with the tyres??

I dont rmb seeing 1 anywhere in my car leh, haven check the boot through. Mine alot black scars. Sad, pearl white so hard to maintain  :crycry:
Logged
Loving My Whitey

Offline stickers

  • Idling (800 rpm)
  • *
  • Posts: 148
Re: Side Strip to Protect Latio from Dents
« Reply #15 on: July 08, 2008, 10:58:15 AM »
Mine is at glove compartment. Think yours is the same.
Logged

Offline shpesft

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 1,671
  • I strive hard to maintain my figure...
Re: Side Strip to Protect Latio from Dents
« Reply #16 on: July 08, 2008, 11:03:16 AM »
Quote from: xuan511 on July 08, 2008, 09:24:57 AM
Eh bros is the touch up paint in the boot with the tyres??

I dont rmb seeing 1 anywhere in my car leh, haven check the boot through. Mine alot black scars. Sad, pearl white so hard to maintain  :crycry:

Nope... Touchup paint might not be standard, may have to check with your SE.

I did install these protectors for my car but it's not a guarantee against determined motorists who want to scratch/dent your ride


Logged
Never leave till tomorrow what you can eat today- Jim Davis aka Garfield

Offline xuan511

  • Low End (2000 rpm)
  • **
  • Posts: 279
  • Latio is a good car
Re: Side Strip to Protect Latio from Dents
« Reply #17 on: July 08, 2008, 02:11:48 PM »
Quote from: shpesft on July 08, 2008, 11:03:16 AM
Nope... Touchup paint might not be standard, may have to check with your SE.

I did install these protectors for my car but it's not a guarantee against determined motorists who want to scratch/dent your ride




wa bro why ur car got TLC words de? not bad quite nice leh

btw, are there chances that they never provide me with touchup paint?
Logged
Loving My Whitey

Offline darrylker

  • Low End (2000 rpm)
  • **
  • Posts: 383
Re: Side Strip to Protect Latio from Dents
« Reply #18 on: July 08, 2008, 10:26:48 PM »
Quote from: shpesft on July 08, 2008, 11:03:16 AM
Nope... Touchup paint might not be standard, may have to check with your SE.

I did install these protectors for my car but it's not a guarantee against determined motorists who want to scratch/dent your ride




Nice ride bro!  :thumbsup:

Btw did you DIY your TLC car decal?
Logged

Offline Jazz

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,097
Re: Side Strip to Protect Latio from Dents
« Reply #19 on: July 08, 2008, 11:46:40 PM »
Quote from: shpesft on July 08, 2008, 11:03:16 AM
Nope... Touchup paint might not be standard, may have to check with your SE.

I did install these protectors for my car but it's not a guarantee against determined motorists who want to scratch/dent your ride




How much you got your side protector strips ? DIY ?  :smile:
Logged
Pages: [1] 2   Go Up
« previous next »