Singapore Nissan Owners Group

Nissan Car Lounge - Almera, Juke, Latio, Qashqai, Sylphy, Teana Owners => Latio => Topic started by: PTC77 on November 19, 2012, 08:44:56 AM

Title: brake/ tail light bulb size?
Post by: PTC77 on November 19, 2012, 08:44:56 AM

Can help confirm if t20 is the correct size for brake light?

Title: Re: brake/ tail light bulb size?
Post by: NSman on November 19, 2012, 05:38:59 PM

i think is P21/5W... you better remove the faulty bulb and double confirm

Title: Re: brake/ tail light bulb size?
Post by: limcc on November 20, 2012, 10:07:39 PM

1157

Title: Re: brake/ tail light bulb size?
Post by: rongshu on September 11, 2018, 03:22:29 PM

From service manual

Front combination lamp	Wattage
High beam	60W
Low beam	55W
Turn signal/Park lamp	28/8W
Side marker lamp	5W
Rear combination lamp	Wattage
Stop/Tail lamp	21/5W
Turn signal lamp	21W
License plate lamp	5W
High-mounted stop lamp	16W

Title: Re: brake/ tail light bulb size?
Post by: rongshu on December 31, 2018, 08:46:15 AM

Recently just changed the tail brake bulb by myself. Super easy to DIY.

1. Remove the clips from the liner. The liner is soft and can be bent so I just removed 3 clips. Use a flat head screw driver to pry the clip.

2. Bend the liner and you will see the tail light connectors. There is no need to remove the whole assembly. You can actually remove the individual bulb connects by twisting it.

3. Twist the bulb out from the socket. And put in the new bulb.

The rear brake bulb is P21/5W. Socket type is 1157. I bought from Autobacs @5.9 which is expensive. You should be able to find cheaper online or from other retailers.

(https://www.clasohlson.com/medias/sys_master/9580139806750.jpg)