Singapore Nissan Owners Group
Nissan Car Lounge - Almera, Juke, Latio, Qashqai, Sylphy, Teana Owners => Latio => Topic started by: corgan on November 30, 2006, 10:06:56 PM
-
Just to share with all, I have DIYed a second door lining to help reduce the wind noise. As you all would have noticed, once our rides hit 80km/h and above, you can start to hear wind noise coming in. :out: But with this DIYed door lining, the noise only becomes noticeable at about 100km/h and the volume of it is definitely 30-50% lower than before. :thumbsup: Best of all, this DIY lining will not cost more than $15. :devil2: After doing the lining, I found the door harder to close because of the extra padding but its slowly getting seasoned and getting easier to close now.
here are some pics to show you what i mean.
before:
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb232%2Fforjononly%2F1.jpg&hash=8a3d3c4b543f51179ab91dec91a93b0cdf9622f5)
after:
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb232%2Fforjononly%2F2.jpg&hash=15bb46d685b57c466b2766c43cd7aaa465099b71)
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1.
2.
3.
4.
-
may I ask, what type of material you are using for this? where to buy them? and any special tool needed?
Thanks
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1.Nick Lee
2.
3.
4.
-
may I ask, what type of material you are using for this? where to buy them? and any special tool needed?
Thanks
its a foam-like material. exact material and where to get it i got no idea also. sorry abt that. :smile: no special tool needed, just a pair of scissors to cut the lining once u stick it onto the door frame. the lining has dbl sided tape behind it for u to attached. less than 15mins can do up 1 whole car le. ;)
-
its a foam-like material. exact material and where to get it i got no idea also. sorry abt that. :smile: no special tool needed, just a pair of scissors to cut the lining once u stick it onto the door frame. the lining has dbl sided tape behind it for u to attached. less than 15mins can do up 1 whole car le. ;)
ok, thanks... then how/where to get the materials for the DIY? :confused1:
-
ok, thanks... then how/where to get the materials for the DIY? :confused1:
just indicate your interest in the list i made. Once i got enough people interested, I'll get my friend to help me get the material. Its his lobang afterall. ;)
-
anyway, will be going down to the meetup at YD on friday night. So if you're nearby and want to take a look at the lining. Just pop by ya? :D
-
anyway, will be going down to the meetup at YD on friday night. So if you're nearby and want to take a look at the lining. Just pop by ya? :D
ok, already put my name on the YD list, but most likely will be late though.. :smile:
-
People interested in the DIY door lining.
1.Nick Lee
2.
3.
4.
-
Hi to all. Few months ago I did ponder the merit of this DIY idea. The insulating material can be purchased from HomeFix easily at $10/tube. There are different diameter type and length, most brown and black. So must do rough measurement of our door circumference to decide on length to get.
But in the end I rejected it because I found out that our original Latio door seals are already of double-insulation type. If you look closely there are 2 circles of the seals around each door. That is why our car has outstanding noise insulation, compare to other cars like Sunny, Lancer, etc. The more you check, the more you will appreciate our Latio quality. My opinion was that adding additional layer will not increase SP by much lah.
And adding the DIY seal will definitely make the door harder to close, which I am not sure is something I want to endure everyday. Not to pour cold water lah, just share my 2cts worth of opinion.
And while at HomeFix, maybe you want to check out a 3M product that look like a spray can costing $15 (?). You just spray its contents to the wheel arches and the foam will harden very quickly, forming a hard resin like material to supposedly increase the noise insulation property at these corners (much like that done at SP shops). My friend told me a can is good enough for more than 2 wheel archs and it feel quite heavy. But personally I feel stock is good enough but those who are interested could try out and give FR lah.
-
nah. no such thing as pour cold water. You're free to give your views bro. At least I know where my friend gets them. :D Homefix?
As for the sound insulation of our latios, I have to admit the quality is a lot better when compared to other cars in the same class but wind noise is a bother to me. Was trying to find a way to reduce the wind noise and happened to chanced upon this DIY lining at another forum. For the price and effort, I believe its a good deal especially if you drive spiritedly and always go fast on expressways. :devil2: Hence I still stand by my pt that wind noise has been reduced 30-50% overall. Anyway, I'm going to YD today so that other bros and sis there can take a look at it and decide for themselves. Maybe can take them for testdrive also :D
-
nah. no such thing as pour cold water. You're free to give your views bro. At least I know where my friend gets them. :D Homefix?
As for the sound insulation of our latios, I have to admit the quality is a lot better when compared to other cars in the same class but wind noise is a bother to me. Was trying to find a way to reduce the wind noise and happened to chanced upon this DIY lining at another forum. For the price and effort, I believe its a good deal especially if you drive spiritedly and always go fast on expressways. :devil2: Hence I still stand by my pt that wind noise has been reduced 30-50% overall. Anyway, I'm going to YD today so that other bros and sis there can take a look at it and decide for themselves. Maybe can take them for testdrive also :D
Hi Jon
Way to go bro, I like your ideal of this DIY! :thumbsup:
Tonight I need to attend and help out a wake at AMK so might not able to drop by YD. That's why did not put my name in the newbie gathering. :crying:
If I can manage to squeezeeeee some time to drop by at YD, I'll definitely like to check out your door lining.
Cheers!
-
nah. no such thing as pour cold water. You're free to give your views bro. At least I know where my friend gets them. :D Homefix?
As for the sound insulation of our latios, I have to admit the quality is a lot better when compared to other cars in the same class but wind noise is a bother to me. Was trying to find a way to reduce the wind noise and happened to chanced upon this DIY lining at another forum. For the price and effort, I believe its a good deal especially if you drive spiritedly and always go fast on expressways. :devil2: Hence I still stand by my pt that wind noise has been reduced 30-50% overall. Anyway, I'm going to YD today so that other bros and sis there can take a look at it and decide for themselves. Maybe can take them for testdrive also :D
Hi, bro. I like ur reply. :thumbsup:
We need ppl with positive attitude. There is definitely no right or wrong opinion. What I did was only to highlight my reservations. We all appreciate ur effort in taking pictures and sharing ur enthusiasm. It is good that you are letting other ppl try out the improvement. Those who want to try out should take note of the visor factor, and also whether they could accept the increased difficulty in closing the doors.
You can definitely get the insulation tubes at Thomson Plaza Homefix store. But I suppose other DIY shop could have stock too. Take note there are those tubes with solid core, those without single hollow center, and those with double hollow center, and different thickess and width (much like aluminium window grill). The gap between the 2 insulation seals on our doors are a bit narrow, so must take care when buying. But safest is to get back the same design that you are using right now, as it is already available for 'audition'.
Cheers and enjoy ur DIY.
-
errr ... OOT a bit, those going YD tonight, please refer to the outing thread, think the location changed to AMK Ave 6 Macdonald (opp AMK Central Library) ... don't later go YD, cannot find anyone there hoh... ::)
http://www.thelatioclub.org/tlcforums/index.php?topic=1635.msg21684#new (http://www.thelatioclub.org/tlcforums/index.php?topic=1635.msg21684#new)
-
Hi, bro. I like ur reply. :thumbsup:
We need ppl with positive attitude. There is definitely no right or wrong opinion. What I did was only to highlight my reservations. We all appreciate ur effort in taking pictures and sharing ur enthusiasm. It is good that you are letting other ppl try out the improvement. Those who want to try out should take note of the visor factor, and also whether they could accept the increased difficulty in closing the doors.
You can definitely get the insulation tubes at Thomson Plaza Homefix store. But I suppose other DIY shop could have stock too. Take note there are those tubes with solid core, those without single hollow center, and those with double hollow center, and different thickess and width (much like aluminium window grill). The gap between the 2 insulation seals on our doors are a bit narrow, so must take care when buying. But safest is to get back the same design that you are using right now, as it is already available for 'audition'.
Cheers and enjoy ur DIY.
No problem bro. :thumbsup:
-
Just to share with all, I have DIYed a second door lining to help reduce the wind noise. As you all would have noticed, once our rides hit 80km/h and above, you can start to hear wind noise coming in. But with this DIYed door lining, the noise only becomes noticeable at about 100km/h and the volume of it is definitely 30-50% lower than before. Best of all, this DIY lining will not cost more than $15. After doing the lining, I found the door harder to close because of the extra padding but its slowly getting seasoned and getting easier to close now.
here are some pics to show you what i mean.
before:
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb232%2Fforjononly%2F1.jpg&hash=8a3d3c4b543f51179ab91dec91a93b0cdf9622f5)
after:
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb232%2Fforjononly%2F2.jpg&hash=15bb46d685b57c466b2766c43cd7aaa465099b71)
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2.
3.
4.
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG (Hopefully it would be the price as mentioned during the meetup at AMK) ;D
3.
4.
-
My friend (driving a honda civic FD, the new one) installed a similar sound proofing strip/door lining on his car. Think if I'm not wrong its from 3M. The material is flat and quite hard. Found it quite hard to close the doors after installation. Damage = $40.
Seen corgan's door lining last evening and its quite different from what my fren had. Its round and soft, similiar to the existing door linings we have on our car. Most important of all, damage is less than half of the 3M one..... Decided to give it a try. IF its not good, can simply just throw it away without much heartache... :bleh: :bleh: :bleh:
-
My friend (driving a honda civic FD, the new one) installed a similar sound proofing strip/door lining on his car. Think if I'm not wrong its from 3M. The material is flat and quite hard. Found it quite hard to close the doors after installation. Damage = $40.
Seen corgan's door lining last evening and its quite different from what my fren had. Its round and soft, similiar to the existing door linings we have on our car. Most important of all, damage is less than half of the 3M one..... Decided to give it a try. IF its not good, can simply just throw it away without much heartache... :bleh: :bleh: :bleh:
Sorry to kp abit. Ur friend civic FD is the cost for 2 doors or all 4 doors?
I believe Corgan cost of $15 only for 2 doors. Correct me if I am wrong. The few designs I saw fr Homefix are from 3M and each about 2m (depend on width and shape) cost about $10. Those small width type should be longer for same cost. 1 tube should be enough for 1 door. And if you got lobang for no brand but really big drums type, should be even cheaper.
I believe if you could get one type that is thin and narrow enough with the appropriate softness, it will be possible to reduce wind noise and yet not increase the difficulty in closing doors. That takes some effort though.
-
Sorry to kp abit. Ur friend civic FD is the cost for 2 doors or all 4 doors?
I believe Corgan cost of $15 only for 2 doors. Correct me if I am wrong. The few designs I saw fr Homefix are from 3M and each about 2m (depend on width and shape) cost about $10. Those small width type should be longer for same cost. 1 tube should be enough for 1 door. And if you got lobang for no brand but really big drums type, should be even cheaper.
I believe if you could get one type that is thin and narrow enough with the appropriate softness, it will be possible to reduce wind noise and yet not increase the difficulty in closing doors. That takes some effort though.
$40 for all 4 doors for my fren's door rubber lining. He said the material from taiwan...
What I understand from Corgan is less than $15 for all 4 doors (Corgan: please correct me if I misinterpret it...). "Thin and narrow enough with the appropriate softness", the door rubber lining on Corgan's car fit exactly your description (in my personal point of view). Its quite easy to close Corgan's door as compared to my fren's FD. My fren's car I have to slam three times then can close....
When I saw the rubber door lining on Corgan's car, i was thinking to myself "Mai Tu Liao!". That's why once I reached home last night I added myself to the list... ;D
-
Sorry to kp abit. Ur friend civic FD is the cost for 2 doors or all 4 doors?
I believe Corgan cost of $15 only for 2 doors. Correct me if I am wrong. The few designs I saw fr Homefix are from 3M and each about 2m (depend on width and shape) cost about $10. Those small width type should be longer for same cost. 1 tube should be enough for 1 door. And if you got lobang for no brand but really big drums type, should be even cheaper.
I believe if you could get one type that is thin and narrow enough with the appropriate softness, it will be possible to reduce wind noise and yet not increase the difficulty in closing doors. That takes some effort though.
er. the material i'm using costs $10 for 4 doors :D
-
anyway, the interest thread for the lining will be here for another week, will close it after nxt week so that I can get the materials from my friend. So if you're interested just put your name down. Even if after the interest thread closes getting the material should not be a problem if you're interested, just pm me will do i guess. ;)
-
hi bros, i got a few concerns, would like to clarify
1) under sun and cool nights, will it cause the material to harden and turn brittle?
2) when want to remove, will the double sided tape cause any damage to the paint? (hopefully not, and i think the sticky remnants can also be removed with thinner or what's the other liquid ah?)
I believe these 2 points can only be told after some time right?
-
Those who want to try out should take note of the visor factor, and also whether they could accept the increased difficulty in closing the doors.
i totally agree with the visor factor. above 90kmh, can hear the "vacuum" wind sounds caused because of the visors.
-
hi bros, i got a few concerns, would like to clarify
1) under sun and cool nights, will it cause the material to harden and turn brittle?
2) when want to remove, will the double sided tape cause any damage to the paint? (hopefully not, and i think the sticky remnants can also be removed with thinner or what's the other liquid ah?)
I believe these 2 points can only be told after some time right?
1) so far had it for 3 weeks, no hardening yet. :devil2:
2) the double sided tape is the same as normal double sided tape. But so far no issues with it coming loose. Can be removed easily unlike 3M double sided tape. Hence I doubt your paint would be damaged in anyway. ;)
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG (Hopefully it would be the price as mentioned during the meetup at AMK)
3.
4.
-
1) so far had it for 3 weeks, no hardening yet. :devil2:
2) the double sided tape is the same as normal double sided tape. But so far no issues with it coming loose. Can be removed easily unlike 3M double sided tape. Hence I doubt your paint would be damaged in anyway. ;)
From what I know, rubber have to be stored in air-conditioned and controlled humidity environment. So think most rubber would deteriorate over time no matter what... Think what we can do is buy more of it lo, when the rubber hardens over time, change a new one, just $10 only ma (about the cost of 2 car wash...).... ;D
-
thats the beauty of it.. $10 nia. :bleh: but one rav4 has been using it for close to 2 yrs.. still no problem. :thumbsup:
-
1) so far had it for 3 weeks, no hardening yet. :devil2:
2) the double sided tape is the same as normal double sided tape. But so far no issues with it coming loose. Can be removed easily unlike 3M double sided tape. Hence I doubt your paint would be damaged in anyway. ;)
Sounds like good news bro! Will be interested to install. but have other priorities first heheh :devil2:
-
Sounds like good news bro! Will be interested to install. but have other priorities first heheh :devil2:
Saw Corgan's car. Neatly fitted; so neat that I had to look harder to notice the extra lining. (Probably because of myself not paying attention to the stock condition all the while, or may be because it was night time when I saw it.) ;)
And I could somehow close the door comfortably. :thumbsup:
Like the rest of you guys, my concern is its durablily and also the physical damage. Anyway, from the threads, seem like it shall be fine fitting them on.
Kinda busy with work and abit reluctant to do anything to my car now. Will contact Bro Corgan once I am ready.
Bro Corgan you are indeed the DIY-Man!
Cheers,
KEL.
-
Saw Corgan's car. Neatly fitted; so neat that I had to look harder to notice the extra lining. (Probably because of myself not paying attention to the stock condition all the while, or may be because it was night time when I saw it.) ;)
And I could somehow close the door comfortably. :thumbsup:
Like the rest of you guys, my concern is its durablily and also the physical damage. Anyway, from the threads, seem like it shall be fine fitting them on.
Kinda busy with work and abit reluctant to do anything to my car now. Will contact Bro Corgan once I am ready.
Bro Corgan you are indeed the DIY-Man!
Cheers,
KEL.
thanks for the support bro.i'm leaving this thread open till end of this week to consolidate orders. Myaybe you want to put ur name in first? no harm getting the material first. :D
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG (Hopefully it would be the price as mentioned during the meetup at AMK)
3. Laguna968
4.
Thanks bro, i may not be able to make it on sunday, can meet you separately on weekdays?
-
no prob. can pass u on weekdays so u can DIY it urself. its that easy! ;)
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG (Hopefully it would be the price as mentioned during the meetup at AMK)
3. Laguna968
4.redman ( if can sat lagi better, if not sunday also can)
Thanks bro, i may not be able to make it on sunday, can meet you separately on weekdays?
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG
3. Laguna968
4. redman
5. ac1d6urn - 91096373
-
thanks for the support ppl! keep it coming! :D
-
Hi Corgan,
thks for your info - personally felt the wind noise is on the high side actually (when compared with Altis).
May I know will the DIY spoil the waterproof/seal of the doors - dun want to reduce noise but get wet or insects in the car. ;D
-
Hi Corgan,
thks for your info - personally felt the wind noise is on the high side actually (when compared with Altis).
May I know will the DIY spoil the waterproof/seal of the doors - dun want to reduce noise but get wet or insects in the car. ;D
hmm. so far there hasnt been any leakages or insects that were able to get into my car so i think it should be pretty all right. ;)
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG
3. Laguna968
4. redman
5. ac1d6urn - 91096373
6. Latioblues
Count me in for the mod.
-
hmm. so far there hasnt been any leakages or insects that were able to get into my car so i think it should be pretty all right. ;)
Hmm, ohk - trust you then :thumbsup:
Me in :)
Aaa, wats the arrangement like for collection?
Will make further announcement right?
-
Hmm, ohk - trust you then :thumbsup:
Me in :)
Aaa, wats the arrangement like for collection?
Will make further announcement right?
;) thanks for the vote of confidence
yeah. will make further announcement later. :D
-
;) thanks for the vote of confidence
yeah. will make further announcement later. :D
Eh? Tot earlier you said would meet either last sunday or this coming sunday for a DIY session? Change date liao huh? Me still thinking of maybe can meet for breakfast first then proceed with the DIY session....
-
Sim, that's a good idea! By the way, do you want to add the door lining to your rear door as well?
-
Eh? Tot earlier you said would meet either last sunday or this coming sunday for a DIY session? Change date liao huh? Me still thinking of maybe can meet for breakfast first then proceed with the DIY session....
haha.. breakfast can.. no prob..
-
anyway, just to update u guys, i should be getting the material tomorrow for you guys. cos it seems like those who are interested already put their name down. :D
once i get the material, then we settle the meetup location and time k? wanna la kopi and DIY at the same time also can. ;)
-
So confirm will be this sun?
location - north south east west?
Thks thks :)
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG
3. Laguna968
4. redman
5. ac1d6urn - West side
6. Latioblues
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG
3. Laguna968
4. redman
5. ac1d6urn - West
6. Latioblues
please add in your prefer meeting location as well. So that we can arrange to meet somewhere central for everyone. ;)
-
corgon bro.. i m interested oso.. but i will be on flt leh.. i only back on mon or tues.. sigh..
-
corgon bro.. i m interested oso.. but i will be on flt leh.. i only back on mon or tues.. sigh..
no prob. I help you put your name down first. Pass you the material another time k? simple job. ;)
-
sticky remnants can also be removed with thinner or what's the other liquid ah?)
Don't worry about the sticky remnants, they can be removed with wd40, will not damage paint, only got to wash before you can add some more double sided tapes when redoing the sound proof.
-
Don't worry about the sticky remnants, they can be removed with wd40, will not damage paint, only got to wash before you can add some more double sided tapes when redoing the sound proof.
thx for the tip bro ;)
-
thx for the tip bro ;)
Can get the material for me too.
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG
3. Laguna968
4. redman
5. ac1d6urn - West side
6. Latioblues
7. hopeless2212[forgetful two]
8. customgolf
9. ashocker
10.
11.
please add in your prefer meeting location as well. So that we can arrange to meet somewhere central for everyone.
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG
3. Laguna968
4. redman
5. ac1d6urn - West side
6. Latioblues
7. hopeless2212[forgetful two]
8. customgolf
9. ashocker - West
10.
11.
please add in your prefer meeting location as well. So that we can arrange to meet somewhere central for everyone.
-
North. Maybe AMK again?
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG
3. Laguna968
4. redman
5. ac1d6urn - West side
6. Latioblues
7. hopeless2212[forgetful two]
8. customgolf
9. ashocker
10.optoms - Im interested also but havent collect my car yet.
11.
please add
-
Thinking of organising a mini DIY session to do this and if you are interested, pls add your name to the list below. Session will most likely be this sunday or next sunday.
1. Nick Lee
2. BlackspotGG
3. Laguna968
4. redman
5. ac1d6urn - West side
6. Latioblues - north side
7. hopeless2212[forgetful two]
8. customgolf
9. ashocker - west side
10.
11.
please add in your prefer meeting location as well. So that we can arrange to meet somewhere central for everyone.
-
Hi optoms, you can put your name down first. Can always join us to do the DIY even without your car. :D
-
ANNOUNCEMENT! Material for DIY session has been purchased. This sunday DIY session confirm ON :thumbsup:
confirmed price of $10 per roll of lining! enough for 4 doors!
People who have put their names down ;)
1. Nick Lee
2. BlackspotGG
3. Laguna968
4. redman
5. ac1d6urn - West side
6. Latioblues - north side
7. hopeless2212[forgetful two]
8. customgolf
9. ashocker - west side
10.
11.
please add in your prefer meeting location as well. So that we can arrange to meet somewhere central for everyone. ;)
-
I have bought some extra lining so if you guys or gals are interested. dun hesitate to to put your name down and join us this sunday! :D
-
ANNOUNCEMENT! Material for DIY session has been purchased. This sunday DIY session confirm ON
confirmed price of $10 per roll of lining! enough for 4 doors!
People who have put their names down
1. Nick Lee
2. BlackspotGG - West! West! West! :devil2:
3. Laguna968
4. redman
5. ac1d6urn - West side
6. Latioblues - north side
7. hopeless2212[forgetful two]
8. customgolf
9. ashocker - west side
10.
11.
please add in your prefer meeting location as well. So that we can arrange to meet somewhere central for everyone.
*(IF we meet in the west maybe can come my house MSCP (opp BBDC), super huge and most of the time half empty one, think can hold the entire TLC, haha... Then across the road the chai tow kway aka fried carrot cake not bad, can have for breakfast.)
-
Sim, that's a good idea! By the way, do you want to add the door lining to your rear door as well?
Actually I was thinking maybe do the front 2 doors first, cos the wind noise mainly comes from the 2 front doors. Maybe do front 2 for a week, then following week then do the 2 rear. Like that then can see the diff of the rubber door lining...
-
By the way, any fellow Latio sport owner so hardcore that's contemplating to put the rubber door lining at the rear 'door' (aka boot) also? :out:
-
By the way, any fellow Latio sport owner so hardcore that's contemplating to put the rubber door lining at the rear 'door' (aka boot) also? :out:
i think bro ac1dburn is gonna do up for the boot as well. ;)
-
Actually I was thinking maybe do the front 2 doors first, cos the wind noise mainly comes from the 2 front doors. Maybe do front 2 for a week, then following week then do the 2 rear. Like that then can see the diff of the rubber door lining...
the effect from lining the front 2 doors will be the most felt for sure. :D since its easy to DIY, I'm sure it wouldnt be a problem. actually a good idea to see the difference the lining can make. :D
-
ANNOUNCEMENT! Material for DIY session has been purchased. This sunday DIY session confirm ON
confirmed price of $10 per roll of lining! enough for 4 doors!
People who have put their names down
1. Nick Lee
2. BlackspotGG - West! West! West! devil2
3. Laguna968
4. redman
5. ac1d6urn - West side
6. Latioblues - north side
7. hopeless2212[forgetful two] - collecting another day
8. customgolf - collecting another day
9. ashocker - west side
10. alezis
11.
please add in your prefer meeting location as well. So that we can arrange to meet somewhere central for everyone.
seems like majority at west side hor :D ... seems like I might to take up your suggestion of place blackspotgg. :D
-
hi i can buy from u first, then when the car come, you can help me to fix it on
-
hi i can buy from u first, then when the car come, you can help me to fix it on
sure. we fix it on together la. or else have to charge u labour le. :D :devil2:
-
hi people. Pls refer to http://www.thelatioclub.org/tlcforums/index.php?topic=1713.0 for meetup location. thanks. ;)
-
still waiting for my car leh....
-
still waiting for my car leh....
its ok bro. just add ur name in. i'll reserve for u. how abt it. ;)
-
Went to bukit batok autobacs this morning and noticed that they sell this type of rubber door lining also. BUT its $12 per roll and don't think its able to do 4 doors just using one roll... AND the material is not as good as the one Corgan. The one at autobacs is the flat flat broad broad type which I personally felt its not so good...
-
it seems like only the few of us will be meeting up to do the lining. :( those who have indicated your interest try not to fly my kite hor. :D
-
Hi people. Just concluded the meetup for the DIY lining. :thumbsup: :D
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place.
For those who are still interested, just add ur name to the thread together and sms me if you can. The price is still fixed at $10 :thumbsup:
1. Nick Lee
2. Latioblues
3. Laguna968
4. hopeless2212[forgetful two] - collecting another day
5. customgolf - collecting another day
6. ashocker - collecting another day
7. alezis - collecting another day
8.
9.
10.
11.
-
Aiya...
Do reserve the tape for me coz I just came back from Beijing today. Damn cold there now..
-
Thanks corgan. :thumbsup: PLs help me to reserve one set cos me getting the car on 19 dec
-
Aiya...
Do reserve the tape for me coz I just came back from Beijing today. Damn cold there now..
will do bro. ;) if ur name is there, its reserved. no worries.
-
Hi people. Just concluded the meetup for the DIY lining.
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place.
For those who are still interested, just add ur name to the thread together and sms me if you can. The price is still fixed at $10 :thumbsup:
1. Nick Lee
2. Latioblues - collecting another day
3. Laguna968
4. hopeless2212[forgetful two] - collecting another day
5. customgolf - collecting another day
6. ashocker - collecting another day
7. alezis - collecting another day
8. optoms - collecting another day
9.
10.
11.
-
Thanks corgan. :thumbsup: PLs help me to reserve one set cos me getting the car on 19 dec
no problem bro. added ur name in.
-
Hi people. Just concluded the meetup for the DIY lining.
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place.
For those who are still interested, just add ur name to the thread together and sms me if you can. The price is still fixed at $10
1. Nick Lee
2. Latioblues - collecting another day
3. Laguna968
4. hopeless2212[forgetful two] - collecting another day
5. customgolf - collecting another day
6. ashocker - collecting another day
7. alezis - collecting another day
8. optoms - collecting another day
9. vlwp - collecting another day
10.
11.
-
Hi people. Just concluded the meetup for the DIY lining.
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place.
For those who are still interested, just add ur name to the thread together and sms me if you can. The price is still fixed at $10 :thumbsup:
1. Nick Lee
2. Latioblues - collecting another day
3. Laguna968 - collecting another day
4. hopeless2212[forgetful two] - collecting another day
5. customgolf - collecting another day
6. ashocker - collecting another day
7. alezis - collecting another day
8. optoms - collecting another day
9. vlwp - collecting another day
10.
11.
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k? ;)
For those who are still interested, just add ur name to the thread and sms me if you can. The price is still fixed at $10 :thumbsup:
1. Nick Lee
2. Latioblues - collecting another day
3. Laguna968 - collecting another day
4. hopeless2212[forgetful two] - collecting another day
5.ashocker - collecting another day
6. alezis - collecting another day
7. optoms - collecting another day
8. vlwp - collecting another day
9.
10.
11.
12.
13.
14.
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
For those who are still interested, just add ur name to the thread and sms me if you can. The price is still fixed at $10
1. Nick Lee - collecting another day
2. Latioblues - collecting another day
3. Laguna968 - collecting another day
4. hopeless2212[forgetful two] - collecting another day
5.ashocker - collecting another day
6. alezis - collecting another day
7. optoms - collecting another day
8.
9.
10.
11.
12.
13.
14.
-
Hi,
did you stick round the whole door or just the upper half of each door as the photo only shows the top part.
thanks
-
Hi,
did you stick round the whole door or just the upper half of each door as the photo only shows the top part.
thanks
It's all round. Very easy to stick it. Just need a little knowledge where is the optimum part to stick it for better result. :smile:
-
It's all round. Very easy to stick it. Just need a little knowledge where is the optimum part to stick it for better result. :smile:
I've been studying where to stick the lining the last 2 days and was wondering if it would be more effective to stick on the door instead of the body, exactly the stretch that compresses onto the inner rubber lining (the part on the body)
Was thinking for $10.00, might give it a try and see how it goes when compared to the way most of the rides are done.
-
I've been studying where to stick the lining the last 2 days and was wondering if it would be more effective to stick on the door instead of the body, exactly the stretch that compresses onto the inner rubber lining (the part on the body)
Was thinking for $10.00, might give it a try and see how it goes when compared to the way most of the rides are done.
bro, u aint the first to think abt it. :D one sunny at the mcf diy meetup. he actually had 2 layers of the lining. one on inner lining of door, and one on the door frame itself. The effect is :thumbsup: :w00t: but the door will definitely be a lot lot harder to close after that.
but anyway bro.if you do try, pls tell us the results k? ;)
-
Hi,
did you stick round the whole door or just the upper half of each door as the photo only shows the top part.
thanks
yep. it goes round the whole door frame as what bro stephen has kindly helped me answered. ;) the whole roll of lining will be able do up all 4 doors. :thumbsup:
-
thanks
cheers!
:thumbsup:
-
Just DIY it in my MSCP. Got some advice from Corgan that you have to pull the tape while sticking it so it will get firm and not loose/thick.
The main thing of pulling is to ensure of enough/excessive of the tape as while doing my 1st door, I find the remainding tape like 'not long enough' to do the rest so i called corgan and asked for advice.(I redo the 1st door again & had a foot excess :scared: )
After pulling & sticking onto the door, I had an excessive of 3 feets.
Yes!!! It's darn hard to close the door now. If got passengers, I have to ensure I'm the last to close the door so that the rest can easily close the door 1st. ( And let me do the 'hard' work... :bleh:)
CheeRs!!!
-
haha. actually there are 2 reasons y need to stretch the material.
1. if you dun stretch it, there will be no tension so the material will not be firm. Also, the material will be thicker so the door will even be harder to close. :D
2. and to ensure that 1 roll is enough for all 4 doors. (actually most people will end up with about 3 feet left on average. :D )
bro. just let the material season out for abt 2 weeks. Then it should be a lot easier to close le. :thumbsup:
-
thanks
cheers!
:thumbsup:
No prob bro. you want me to reserve one for u? :D :devil2:
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
For those who are still interested, just add ur name to the thread and sms me if you can. The price is still fixed at $10 :thumbsup:
1. Nick Lee - collecting another day
2. Latioblues - collecting another day
3. Laguna968 - collecting another day
4. hopeless2212[forgetful two] - collecting another day
5. alezis - collecting another day
6. optoms - collecting another day
7. NSman - collecting another day
8.
9.
-
corgan, do you still have any spare?? i need 1, lets me know or sms me 90236299, cheers
-
yup. got abt 3-4 left. ;) so i reserve 1 for u then. I can be reached at 94356959. let me know when u want it.
-
haha. actually there are 2 reasons y need to stretch the material.
1. if you dun stretch it, there will be no tension so the material will not be firm. Also, the material will be thicker so the door will even be harder to close. :D
2. and to ensure that 1 roll is enough for all 4 doors. (actually most people will end up with about 3 feet left on average. :D )
bro. just let the material season out for abt 2 weeks. Then it should be a lot easier to close le. :thumbsup:
Actually mine started to get season just a couple of days after the fixation :smile:
-
Actually mine started to get season just a couple of days after the fixation :smile:
haha. so fast ah. :D the inital seasoning should be the most, but the material should still provide the vacuum effect or else no use le ;)
-
haha. so fast ah. :D the inital seasoning should be the most, but the material should still provide the vacuum effect or else no use le ;)
It is still effective and the vacuum feeling is oblivious. At least I'm happier that the door is getting easier to close that soon as expected.
-
It is still effective and the vacuum feeling is oblivious. At least I'm happier that the door is getting easier to close that soon as expected.
thats good to hear bro. :thumbsup:
-
rem to keep one pcs for me. I confirm collect my car on the 19th. May only collect from u after xmas
-
rem to keep one pcs for me. I confirm collect my car on the 19th. May only collect from u after xmas
no problem bro. already reserved. :D
-
Just an update
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
For those who are still interested, just add ur name to the thread and sms me if you can. The price is still fixed at $10 :thumbsup:
1. Nick Lee - collecting another day
2. Laguna968 - collecting another day
3. hopeless2212[forgetful two] - collecting another day
4. optoms - collecting another day
5. alezis - collecting another day
6.
7.
8.
-
Hi Corgan,
Thank you for your time this morning. Nice talking to you.
Initially I dun really believe the part about very hard to close the door. Now I fully agree. Did driver door so far, the door now is slightly pertruded out when compared with my passenger door.
Should be ok I suppose, will have to wait on Monday to see the result.
-
Hi Corgan,
Thank you for your time this morning. Nice talking to you.
Initially I dun really believe the part about very hard to close the door. Now I fully agree. Did driver door so far, the door now is slightly pertruded out when compared with my passenger door.
Should be ok I suppose, will have to wait on Monday to see the result.
no problem bro. Had a nice time talking to you too. Especially about your DIY experiences. :D Anyway, give the lining some time to season out then should be fine le. ;)
-
A very obvious improvement for this modz is If you are travelling tunnels like CTE which i did yesterday.. You can really feel no foreign sound from outside & it's a different feeling.
CheeRs!!!
-
A very obvious improvement for this modz is If you are travelling tunnels like CTE which i did yesterday.. You can really feel no foreign sound from outside & it's a different feeling.
CheeRs!!!
Agree with you vincent. But the 'down' side of this mod is that my ride my feels slower... That's what I felt when I sound proof my 4 doors...
-
Agree with you vincent. But the 'down' side of this mod is that my ride my feels slower... That's what I felt when I sound proof my 4 doors...
bro. simple way to fix this "problem". drive faster. :devil2: :D feeling shiok hor. :thumbsup: :D
-
A very obvious improvement for this modz is If you are travelling tunnels like CTE which i did yesterday.. You can really feel no foreign sound from outside & it's a different feeling.
CheeRs!!!
can la.. people horn u can still hear. :devil2: :D
-
Just another update
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
For those who are still interested, just add ur name to the thread and sms me if you can. The price is still fixed at $10 :thumbsup:
1. Nick Lee - collecting another day
2. Laguna968 - collecting another day
3. alezis - collecting another day
4. optoms - collecting another day
5.
6.
7.
8.
-
bro. simple way to fix this "problem". drive faster. :devil2: :D feeling shiok hor. :thumbsup: :D
Ya, that's what I have been doing. Maybe that's why windscreen cracked.... :crying:
-
Ya, that's what I have been doing. Maybe that's why windscreen cracked.... :crying:
:zipped: :zipped: effect too good le. :D
last 4 pieces! anymore takers?? :devil2:
-
:zipped: :zipped: effect too good le. :D
last 4 pieces! anymore takers?? :devil2:
See? Told you all sure sold out one... ;D
-
still 4 more leh. :D
-
Bro, Are you free to meet up during weekdays @ afternoon time? SMS me 98582336 ya. THanks.
-
me too, weekdays can?
central/west is fine.
can sms me @ 97869794
-
Done mine yesterday, I pasted is along the orginal rubble lining instead of on the car body coz mine is white colour, with black lining is looks abit owful & not so nice :P
All doors are so hard to close even you slammed the door... :D hahaha, must hold the handle to pushed it to close. Overall, when me & wife sat in the car this morning, we felt that we have entered in a vaccum tupperwear, hahaha, was so enclosed like no air is coming in, while driving, really felt the road/wind noise been reduced so much, whole car are much more quieter than before. :thumbsup: (i dont have any SP on my doors).
But donno how long can it last..... coz it just double sided tape on it, after server opened & closed doors, car washes, when will it drop off??... must think of a way to secure it firmly...
-
Done mine yesterday, I pasted is along the orginal rubble lining instead of on the car body coz mine is white colour, with black lining is looks abit owful & not so nice :P
All doors are so hard to close even you slapped the door... :D hahaha, must hold the handle to pushed it to close. Overall, when me & wife sat in the car this morning, we felt that we have entered in a vaccum tupperwear, hahaha, was so enclosed like not air is coming in, while driving, really felt the road/wind noise been reduced so much, whole car are much more quieter than before. :thumbsup: (i dont have any SP on my doors).
But donno how long can it last..... coz it just double sided tape on it, after server opened & closed doors, car washes, when will it drop off??... must think of a way to secure it firmly...
haha. somewhat knew u would experiment with the rubber part after u asked me can or not. ;D I'm not quite sure how sticking it on the rubber part will affect the seasoning time, but i suppose just give it 2 weeks or more bah. ;) As for how long it can last, only you can tell us bro, but i suspect it wont last as long as if it were stuck on the door frame.
Like ur analogy best, "vacuum tupperwear". :D :thumbsup:
-
I've been studying where to stick the lining the last 2 days and was wondering if it would be more effective to stick on the door instead of the body, exactly the stretch that compresses onto the inner rubber lining (the part on the body)
Was thinking for $10.00, might give it a try and see how it goes when compared to the way most of the rides are done.
Haha, i quoted jef post, want to try to paste it on the body rubber lining, it looks much neater & nicer lor... not on my white body... :P
-
2 more pieces left!! :D any takers? :devil2:
-
still 4 more leh. :D
I will book 2 sets.
pm me at 94228022
thanks
-
hi corgan i collected my car this morning.... enjoying my ride. SE said must wait for 3-6 month then can collect the armrest... :blink:
Anyway when can meet you to collect the stuff... :devil2:
-
Hi Bro Corgan
Pls remember to reserve one for me ya. Will collect from u 2ml after I fetch my wife..cya. Thanks.
-
Is there anymore of it? I'd like to have one too. but could someone help me out with the fixing?
-
oh no... corgan....you ran out of stock liao...kekekekeke :P
-
wah. suddenly all the orders flood in ah. (pun intended) :D
dun worry, those who have contacted me to confirm I have already reserved for u. ;)
-
I will book 2 sets.
pm me at 94228022
thanks
noted ;)
-
Is there anymore of it? I'd like to have one too. but could someone help me out with the fixing?
bro. let me get back to you with regards to this k? have to check stock again. :D
-
jon, if u r bringing in new stock, reserve 1 set for me pls. but u must help me with the fixing can? ::)
-
Hi people. Think I ran out of stock liao. Those who are interested, pls put your name down and if can get enough orders to bring the price down, I'll head down to buy the stuff again. ;)
1. undercover :D
2.
3.
4.
5.
-
thks bro. :D
-
Hi people. Think I ran out of stock liao. Those who are interested, pls put your name down and if can get enough orders to bring the price down, I'll head down to buy the stuff again. ;)
1. undercover :D
2.
3.
4.
5.
You forgot to add me. :P
-
Hi people. Think I ran out of stock liao. Those who are interested, pls put your name down and if can get enough orders to bring the price down, I'll head down to buy the stuff again. ;)
1. undercover :D
2. teo_jason - 98790334
3.
4.
5.
-
Hi people. Think I ran out of stock liao. Those who are interested, pls put your name down and if can get enough orders to bring the price down, I'll head down to buy the stuff again.
1. undercover
2. revin81
3. teo_jason - 98790334
4.
5.
-
A picture says a thousand words,
Front door with lining installed onto the frame
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fwww.sghomeground.com%2Flatio4.jpg&hash=e8974640d05ff679ed8ff5c1327302c378d092d7)
Rear door with lining installed onto the frame
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fwww.sghomeground.com%2Flatio5.jpg&hash=5ed8f060de412b16ddcccb2d1e3589bc9dff842e)
Front door with lining installed onto the door
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fwww.sghomeground.com%2Flatio6.jpg&hash=18206104c84356c91635bc3466d7d051a3250c58)
Rear door with lining installed onto the door
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fwww.sghomeground.com%2Flatio7.jpg&hash=76760334913c3f181a9615d896264079c59a9e77)
-
Thanks for the pictures bro. :D As always, give us your feedback k? and whether the lining on the door itself is better than sticking it on the door frame. ;) :thumbsup:
-
latioblues, from the pic i see, you paste the lining on the car body on the right front/rear doors, and paste it on the door flame itself for the left front/rear doors????
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Laguna968 - collecting another day
2. alezis - collecting another day
3. optoms - collecting another day
These are the people who have allocated their interest. Prices still at $10
1. undercover
2. revin81
3. teo_jason - 98790334
4.
5.
-
latioblues, from the pic i see, you paste the lining on the car body on the right front/rear doors, and paste it on the door flame itself for the left front/rear doors????
You are absolutely right. 10 buck worth of tape can only do 4 doors mah, what to do. :D :D
Anyway, a more detailed description of the closing door effect.
With the tape pasted onto the frame,
Front door - Hard to close, easier now after it becomes seasoned.
Rear door - A little harder to close than before only. Was quite surprise that it wasn't like the front door.
With tape pasted onto the door,
Front door - Much easier to close as compared to the above method. It also looks nicer as the tape is concealed with the original rubber. The vacuum effect is still there, but I dun have the chance to verify if this method is better that the former in terms of sound proofing.
Rear door - Same as front door.
personally, I prefer the second method. Cleaner and better looking. Based on what I see, if you have 10 more bucks to spare, it is possible to do both method on the same door.
-
Recently noticed that my rear doors when opening got this 'muack muack' sound, sounds like rubbers rubbing against each other sound. Guess its the new door lining rubbing against the original lining. Think its because I did't stick the door lining properly. If the findings from the bros here is that its better to stick on the door itself, then maybe a buy one more roll and do it on the door and take out the one on the frame, $10 and 30min only ma... :D
-
You are absolutely right. 10 buck worth of tape can only do 4 doors mah, what to do. :D :D
Anyway, a more detailed description of the closing door effect.
With the tape pasted onto the frame,
Front door - Hard to close, easier now after it becomes seasoned.
Rear door - A little harder to close than before only. Was quite surprise that it wasn't like the front door.
With tape pasted onto the door,
Front door - Much easier to close as compared to the above method. It also looks nicer as the tape is concealed with the original rubber. The vacuum effect is still there, but I dun have the chance to verify if this method is better that the former in terms of sound proofing.
Rear door - Same as front door.
personally, I prefer the second method. Cleaner and better looking. Based on what I see, if you have 10 more bucks to spare, it is possible to do both method on the same door.
good fr bro. :thumbsup: :D think when i redo my car i also gonna stick it onto the door itself to try le. :D
-
Recently noticed that my rear doors when opening got this 'muack muack' sound, sounds like rubbers rubbing against each other sound. Guess its the new door lining rubbing against the original lining. Think its because I did't stick the door lining properly. If the findings from the bros here is that its better to stick on the door itself, then maybe a buy one more roll and do it on the door and take out the one on the frame, $10 and 30min only ma... :D
haha. anytime u wan bro, just leave me a msg, then maybe can have that delicious chao tao kuay again. :D
-
haha. anytime u wan bro, just leave me a msg, then maybe can have that delicious chao tao kuay again. :D
Too bad rubber have shelf life, else I'll buy 2-3 to stock up, anytime the current one not so good liao can change, muahahahhahahaha....
Chai Tow kuay? No need to wait till DIY session, if you coming on any sunday morning can SMS me, cos that's normally my breakfast for sunday. Also if any DIY can come to my MSCP, big, bright, windy, got shops and coffee shop below the MSCP... ;D
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Laguna968 - collecting another day
2. alezis - collecting another day
3. optoms - collecting another day
These are the people who have allocated their interest. Prices still at $10
1. undercover
2. revin81
3. teo_jason - 98790334
4. Leapin_Toufu (9-8-5-5-5-1-9-1)
5.
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Laguna968 - collecting another day
2. alezis - collecting another day
3. undercover
4. Revin81
These are the people who have allocated their interest. Prices still at $10 :thumbsup:
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3.
4.
5.
-
Hi people. Due to some unforeseen circumstances :D , I have of now 4 pieces left, 2 for ALezis and Laguna and the other 2 for the first 2 people who have indicated their interest which are Bro undercover and revin81.
-
hi corgan, think i need to get from u another roll cos i really messed up the installation. cut and paste , cut and paste. :mad: Some linnings came off...... I will redo it again... :nonod:
-
hi corgan, think i need to get from u another roll cos i really messed up the installation. cut and paste , cut and paste. :mad: Some linnings came off...... I will redo it again... :nonod:
its ok bro. Like i said over the phone, just give me a ring then i'll come over to help u. ;)
-
Thank!! You are very helpful :thumbsup:
-
Thank!! You are very helpful :thumbsup:
no problem bro. ;)
-
Hey Bro Corgan.. :D The sound proofing insulator tape is onli $10 for 4 doors..where to find?Rite..Homefix are selling easily 2 to 3 times the price..
Bro,give it a try..no harm ..Thanks for Bro Corgan for organising this..Thumbs up for u and merry christmas to the bros and sista here
-
Hey Bro Corgan.. :D The sound proofing insulator tape is onli $10 for 4 doors..where to find?Rite..Homefix are selling easily 2 to 3 times the price..
Bro,give it a try..no harm ..Thanks for Bro Corgan for organising this..Thumbs up for u and merry christmas to the bros and sista here
:D wah. came all the way here. :D Merry christmas and a Happy New yr to u too Benny. :clap:
-
Bro Corgan
Well said by Bro Maddriver (Benny), good job on the door lining :thumbsup:,. BTW your Latio very shine and wet. Should post your pic here. Wish you and all bro & sis a merry christmas and a happy new year. :smile:
-
Bro Corgan
Well said by Bro Maddriver (Benny), good job on the door lining :thumbsup:,. BTW your Latio very shine and wet. Should post your pic here. Wish you and all bro & sis a merry christmas and a happy new year. :smile:
wah. So long nv see u post liao. how's the effect of the lining on urs? You got it done also? :D Ur ride even wetter than mine la. :D I got some butter wax to try from Benny but like keep raining these few days again. :(
Anyway, Merry Christmas and a Happy New Year to you too!
-
Out of Town for a while. haven't fix mine yet. Interested to fix the lining on the door rather than frame, neater. You have been a :thumbsup: diy sifu, very soon will be guru. We need ppl like you :thumbsup:
Cheers
-
Out of Town for a while. haven't fix mine yet. Interested to fix the lining on the door rather than frame, neater. You have been a :thumbsup: diy sifu, very soon will be guru. We need ppl like you :thumbsup:
Cheers
haha. I just newbie who willing to learn and experiment. :D or allow others to experiment on mine. Other bros like Vincent and latioblues who did up their own rides are the true sifu ;) Hope too see you next time at our DIY sessions then. :thumbsup:
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Laguna968 - collecting another day
2. alezis - collecting another day
3. undercover
4. Revin81
These are the people who have allocated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3.
4.
5.
-
Hi Corgan, would you be able to install it for me?
-
Hi Corgan, would you be able to install it for me?
Hi bro. I believe its simple enough to DIY but i dun mind showing u how to do up one door ;) pls contact me to arrange a place and time to meet.
-
Hi Corgan, would you be able to install it for me?
You should start charging them $1 for the installation. Consider that as a token of appreciation or just save up for your future experience. :bleh:
Anyway, my experience is that if you intend to stick it on your door itself, try not to stretch it. The rubber strip is elastic but not the sticking tape behind. Part of my lining came off and I need to patch it up with the leftovers.
I am still waiting to do the wheel arc... when you free? can "experiment" again. :D
-
You should start charging them $1 for the installation. Consider that as a token of appreciation or just save up for your future experience. :bleh:
Anyway, my experience is that if you intend to stick it on your door itself, try not to stretch it. The rubber strip is elastic but not the sticking tape behind. Part of my lining came off and I need to patch it up with the leftovers.
I am still waiting to do the wheel arc... when you free? can "experiment" again. :D
:D Part of the fun from DIY comes from doing it ourselves, thats what I believe.
Think we might be helping ken do his car up in Jan, maybe can do the wheel arc as well, join us then? :D
-
:D Part of the fun from DIY comes from doing it ourselves, thats what I believe.
Think we might be helping ken do his car up in Jan, maybe can do the wheel arc as well, join us then? :D
If timing permits, will definitely be there to see the famous Ken in person and also his white car. :D
-
:D Part of the fun from DIY comes from doing it ourselves, thats what I believe.
Totally agree with Corgan! The feeling is totally different when you DIY the thing by yourself. This simple DIY only took me about 30min (cos I slowly do and TCSS along the way) so no sweat! It feels damn rewarding when everything is completed and you enjoy the end product... :D
-
Hey everybody. I was at Autobacs 2 days ago and saw that it is also selling some DIY Soundproofing tapes. I bought a roll of 1cm-width type for about $12.90. It is of 73ft! which is more than 20m long. But the material seems to be of different type as bro Corgan got. After installing in my car, I would say wind sound is reduced when travelling on expressway but road noise seems to have become more prominent (accetuated by absence of wind sound?).
Any bro/sis who has missed out bro Corgan's MO for the tape can try that if you are not patient enough to wait. The tape is designed for car door soundproofing as put on the product cover. Autobacs is located at Bukit Batok ave 6. It is also having 15% discount on car grooming products now.
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Laguna968 - collecting another day
2. alezis - collecting another day
3. undercover
4. Revin81
These are the people who have allocated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3.
4.
5.
-
Hey everybody. I was at Autobacs 2 days ago and saw that it is also selling some DIY Soundproofing tapes. I bought a roll of 1cm-width type for about $12.90. It is of 73ft! which is more than 20m long. But the material seems to be of different type as bro Corgan got. After installing in my car, I would say wind sound is reduced when travelling on expressway but road noise seems to have become more prominent (accetuated by absence of wind sound?).
Any bro/sis who has missed out bro Corgan's MO for the tape can try that if you are not patient enough to wait. The tape is designed for car door soundproofing as put on the product cover. Autobacs is located at Bukit Batok ave 6. It is also having 15% discount on car grooming products now.
Hey Bro, thanks for your FR on the autobacs door lining. Its the hard type of door lining right? Meaning to say its like hard compressed rubber, and not like sponge right? Wind sound is reduced but road noise louder? Doesn't sounds right to me. Maybe you see if it improves over time and update us again ya?
For the one that I'm using (got it from Corgan), both wind noise and road noise are reduced significantly. It gets better after a while and now I'm fully enjoying it cos the rubber season liao, so door closing seems to be back to normal. If the louder road noise persist, think maybe you should try using the door lining from Corgan. Cheaper by $2.90, can eat a plate of carrot cake and one milo liao, haha... :D
-
wah. 73ft! :D thats a lot of lining. Anyway, when u referred to road noise, i take it as the noise coming from the tyres and undercarriage rite? I believe it sounds more prominent because after the wind noise is reduced, the other major source of noise is road noise and hence you are more likely to pay attention to it now than before, just like you said. :D but unless we SP the floorpan and the wheel arcs, we just have to live with it.
-
........ can eat a plate of carrot cake and one milo liao, haha... :D
bro. how's the effect so far? still ok? :D i really miss the carrot cake sia. but damn far sia. :D
-
corgan rem that time i ask u to reserve one for me cos today when washing my car, the strip just come off from the passenger door... :crying:
-
corgan rem that time i ask u to reserve one for me cos today when washing my car, the strip just come off from the passenger door... :crying:
yup. i still got it with me, waiting for when u free. ;)
-
Nothing to do this morning... clocking post by posting some pics
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy167%2FNSmanX%2FLatio%2FDSC00251.jpg&hash=806a0373117e1f2430875eb036a604823b4ad258)(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy167%2FNSmanX%2FLatio%2FDSC00253.jpg&hash=5679d666fe1d3d7625c1c1672bf6daf79c2bb960)
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy167%2FNSmanX%2FLatio%2FDSC00254.jpg&hash=032486bbff7e92ade833630249184d8076b95dc8)(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy167%2FNSmanX%2FLatio%2FDSC00255.jpg&hash=9a2325721c86b1bf1ed62b2ef16fd03ef302f08c)
Can you spot my DIY door lining>?? :P
-
:thumbsup:
-
Nothing to do this morning... clocking post by posting some pics
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy167%2FNSmanX%2FLatio%2FDSC00251.jpg&hash=806a0373117e1f2430875eb036a604823b4ad258)(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy167%2FNSmanX%2FLatio%2FDSC00253.jpg&hash=5679d666fe1d3d7625c1c1672bf6daf79c2bb960)
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy167%2FNSmanX%2FLatio%2FDSC00254.jpg&hash=032486bbff7e92ade833630249184d8076b95dc8)(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi5.photobucket.com%2Falbums%2Fy167%2FNSmanX%2FLatio%2FDSC00255.jpg&hash=9a2325721c86b1bf1ed62b2ef16fd03ef302f08c)
Can you spot my DIY door lining>?? :P
can spot. :D got prize or not. so how's the effect?
-
bro. how's the effect so far? still ok? :D i really miss the carrot cake sia. but damn far sia. :D
Initially ok, but after about one week it gets better! :thumbsup: Now rubber season liao, door closure like last time like that... ;D
-
can spot. :D got prize or not. so how's the effect?
post FR liao mah~ tupplewear, vacuummed feeling, lesser road noise, now doors are easier to close
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Revin81
2. alezis
These are the people who have allocated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3.
4.
5.
-
Weather finally turned fine - decided to do the 2 front doors to try try.
The curves can be challenging, but must say the results is more than fantastic!
Heehee, tink im satisfied enough to just do the 2 front doors for now ;D
-
Weather finally turned fine - decided to do the 2 front doors to try try.
The curves can be challenging, but must say the results is more than fantastic!
Heehee, tink im satisfied enough to just do the 2 front doors for now ;D
wah bro. now then u do it up ah. :D anyway, glad to hear that u're enjoying the effects. ;) The lining should season out after 1-2 weeks then the doors will be easier to close then.
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Revin81
2. alezis
These are the people who have allocated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4.
5.
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Revin81
2. alezis
These are the people who have allocated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5.
-
wah bro. now then u do it up ah. :D anyway, glad to hear that u're enjoying the effects. ;) The lining should season out after 1-2 weeks then the doors will be easier to close then.
heehee, no choice leh, been working + rainy season lately :)
Am happy to say that it passed the weather test last nite! :thumbsup:
So far door have not been giving too much problem. In fact quite happy coz of the solid "thud" sound when closing :D
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Revin81
2. alezis
These are the people who have allocated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
-
Hi Corgan,
I saw the pics NSman posted. He seem to put the strip at a different place then you. He put directly on the rubber lining, whereas you put on the metal part of the body. I a bit confused, so which one is correct huh?? :confused1:
-
Hi Corgan,
I saw the pics NSman posted. He seem to put the strip at a different place then you. He put directly on the rubber lining, whereas you put on the metal part of the body. I a bit confused, so which one is correct huh?? :confused1:
all are correct. :D depends on u where u like it. effect shld be roughly the same cos the main purpose is to aid the rubber seal in sealing the doors. ;) His method looks nicer but since ur car is black in colour, i dun think it will make much difference. :D
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Revin81
2. alezis
These are the people who have allocated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
-
Hi everyone. Once the no of ppl who are interested hits 10, I will go down and get the material. ;) prices will still remain at $10 :thumbsup:
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Revin81
2. alezis
These are the people who have allocated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. Revin81
2. alezis
These are the people who have allocated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
Thanks.
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. alezis
These are the people who have allocated their interest. Prices still at $10 :thumbsup:
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
Thanks.
-
These are the people who have put their names down and still havent collected. Pls contact me to fix a collection time and place k?
1. alezis
These are the people who have allocated their interest. Prices still at $10 :thumbsup:
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)
Thanks.
May need your advise how to do it sui sui ya :smile:
Thanks in advance.
-
Hi corgan, Managed to squeeze out some time to do it today. I hid it between the rubber and the frame, so that it looks like it's part of the rubber. However, I don't know if it's as effective as your method and carmodz. Wanna do a test? give me a call if you wanna check it out.
-
Hi corgan, Managed to squeeze out some time to do it today. I hid it between the rubber and the frame, so that it looks like it's part of the rubber. However, I don't know if it's as effective as your method and carmodz. Wanna do a test? give me a call if you wanna check it out.
it should be effective bro. no need to test la. :D as long you feel an improvement compared to last time, means the lining is doing its job. :thumbsup: give it a go on the HW, thats when the most improvement can be felt. ;)
-
May need your advise how to do it sui sui ya :smile:
Thanks in advance.
no problem bro. ;)
-
These are the people who have indicated their interest. Prices still at $10 :thumbsup:
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)
Will go buy the lining once the number of people interested hits 10. ;)
-
I'll be no. 10 then! :D
=======================================================
These are the people who have indicated their interest. Prices still at $10 :thumbsup:
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)
10. NotYetz
-
I'll be no. 10 then! :D
=======================================================
These are the people who have indicated their interest. Prices still at $10 :thumbsup:
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)
10. NotYetz
okiez! I'll head down to get the lining. Will update once I get it. ;) For those who still wants, just add ur name down k? I'll probably buy 2-3 extra this time round.
-
These are the people who have indicated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)
10. NotYetz
11. sstar 97607986
-
These are the people who have indicated their interest. Prices still at $10
1. teo_jason - 98790334
2. Leapin_Toufu (9-8-5-5-5-1-9-1)
3. reflecx
4. hopeless2212 (heh.. need one more.. cos i did such a bad job for seng's car that he gotto redo it.. heh)
5. Xmustang74 (91802659)
6. Pest11 (9760-7146)
7. toniwong (92997178)
8. GKF (94553997)
9. Latio2000 (90122991)
10. NotYetz
11. sstar 97607986
12. redman 91443044
-
Hi people. I have bought the lining already so all those who have indicated their interest have their lining reserved for them. ;) watch this space again for details on meetup to collect the lining. ;) Still got some spares so just leave ur name down if u wan k? :D
-
Alan, how come u need another one leh? :confused1:
-
Will there be a meetup to teach on how to fix the lining? ;)
-
Will there be a meetup to teach on how to fix the lining? ;)
definitely ;) even if u cant come for meetup, I'll still show u how when I meet u to pass it to u.
-
Thats great ... will hear from you soon the the meet up cum mass diy lining exercise ... ;)
-
definitely ;) even if u cant come for meetup, I'll still show u how when I meet u to pass it to u.
:thumbsup: :thumbsup: :thumbsup:
-
Latest update
Meetup this sunday at
Time: 8am onwards (till probably 11am)
Location: Blk 466 Sembawang Drive Basement car park.
http://www.streetdirectory.com/asia_travel/travel/travel.php?travel_id=5964&travel_site=124297
agenda: TLC carwash / collection of door lining for those who have put ur name down :D :D
-
Firstly, wish to thank bro Alex and Perrin for organising the mini meetup.
To bros Leapin-tofu, Sstar, toniwong, reflecx and latio2000, wish to thank you guys for coming all the way down to sembawang today in the morning to collect the lining. Hope you guys will post ur FR here once u do it up. :D Need any help just contact me. ;)
Next, these are the people who have not collected from me yet.
1. teo_jason
2. GKF
3. Redman
4. hopeless2212
5. Xmustang74
6. Pest11
7. NotYetz
So please watch out for the next collection date or contact me @ 94356959 to arrange collection k? ;)
for those who are still interested, I still got some rolls left. So just add ur name in k? :thumbsup: prices still at :thumbsup:$10
-
The following are the people who have not collected from me yet. ;)
1. NotYetz (collecting friday)
2. GKF
3. Redman
4. hopeless2212
5. Xmustang74
6. Pest11
So please watch out for the next collection date or contact me @ 94356959 to arrange collection k?
for those who are still interested, I still got some rolls left. So just add ur name in k? prices still at $10 :thumbsup:
-
The following are the people who have not collected from me yet.
1. Pest11
2. GKF
3. Redman
4. hopeless2212
5. Xmustang74
So please watch out for the next collection date or contact me @ 94356959 to arrange collection k?
for those who are still interested, I still got some rolls left. So just add ur name in k? prices still at $10
-
The following are the people who have not collected from me yet.
1. Pest11
2. GKF
3. Redman
4. hopeless2212
5. Xmustang74
So please watch out for the next collection date or contact me @ 94356959 to arrange collection k?
for those who are still interested, I still got some rolls left. So just add ur name in k? prices still at $10
sorry corgan for the delay.. this past week busy wif the funeral preparations.. i will ask seng to contact u and c if he can collect on my behalf k.. thanks alot!
-
hey polly. No rush ok? Just contact me if u free ;)
-
[size=15pt]final update[/size]
The following have not collected from me yet. Reserved already so just contact me to arrange collection. ;)
1. Pest11
2. GKF
3. Redman
4. hopeless2212
5. Xmustang74
As for remaining stock, they have been CLEARED :devil2: :D
so this shld conclude this round of purchase for the DIY door lining
-
Hi Bro Corgan
I need more for standby incase wear and tear in the future. Wher to get the material huh? Or are you getting more? Thanks
-
hi bro. Not sure whether I'll be getting anymore material for now. Cos getting a bit busy. But if u really need it, can get a few bros to consolidate orders and i'll get it for u guys.
Cant tell u where exactly where to get it as its my friend's lobang. Hope u understand. ;)
on a side note, i'm testing a new material which is better but also a lot more expensive. Will let u guys know the effect and maybe organise a MO if got enough interest for it. ;)
-
hi bro. Not sure whether I'll be getting anymore material for now. Cos getting a bit busy. But if u really need it, can get a few bros to consolidate orders and i'll get it for u guys.
Cant tell u where exactly where to get it as its my friend's lobang. Hope u understand. ;)
on a side note, i'm testing a new material which is better but also a lot more expensive. Will let u guys know the effect and maybe organise a MO if got enough interest for it. ;)
Wah bro, got new product boh jio :P I wanna test too! :P
-
u know me la bro. I will try the stuff first before I give my review and see whether can be recommended or not. :D
-
No Prob, Keep me update Bro. Thanks.
-
seems like there are still ppl who want the lining. Probably going to organise a group buy for the lining again. :D
Those who are interested, pls leave your name and pm me ur contact no pls. thx. :yehyeh:
1.
2.
3.
4.
-
seems like there are still ppl who want the lining. Probably going to organise a group buy for the lining again. :D
Those who are interested, pls leave your name and pm me ur contact no pls. thx. :yehyeh:
1. Revin81
2.
3.
4.
Cannot post Contact nos already... new rule right?
-
seems like there are still ppl who want the lining. Probably going to organise a group buy for the lining again. :D
Those who are interested, pls leave your name and pm me ur contact no pls. thx. :yehyeh:
1. Revin81
2. Tony
3.
4.
Cannot post Contact nos already... new rule right?
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3.
4.
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4.
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
5. Znie (need 2 sets)
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
5. Znie (need 2 sets)
6. mydotcom
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8.
9.
10.
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9.
10.
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10.
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. Volks
-
hey folks, i will most probably get the stuff by this week. will post here and update you guys via sms on when to collect. Cheers! :yehyeh:
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. Volks
12. kwan
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. Volks
12. kwan
13. papajo82 (must show how to do it too cozz i'm totally blur in diy stuff :bleh:)
-
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. kwan
12. papajo82 (must show how to do it too cozz i'm totally blur in diy stuff )
-
Final update. Will be going down to get the stuff this weekend as I was quite busy this whole week. Self collection at my place or NTU nxt week. Will contact you guys again.
Those who are interested, pls leave your name and pm me ur contact no pls. thx.
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11 (need 2 sets)
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. kwan
12. papajo82 (must show how to do it too cozz i'm totally blur in diy stuff )
-
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11 (need 2 sets)
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. kwan
12. papajo82 (must show how to do it too cozz i'm totally blur in diy stuff )
13. robtan99 (need help in guidance too)
-
Bro Corgan,
Are u also able to guide installation during collection? Coz I'm a newbie in door lining DIY. :confused1:
-
Bro Corgan,
Are u also able to guide installation during collection? Coz I'm a newbie in door lining DIY. :confused1:
sure thing bro. ;) shldnt be a problem.
-
wah..
good business hor..
-
ma ma hu hu la ;)
btw seng, can pm the price of DB drive 1200.1 with installation, cables etc when u free? thx
-
ma ma hu hu la ;)
btw seng, can pm the price of DB drive 1200.1 with installation, cables etc when u free? thx
no problem. =]
-
Hi everyone. I have purchased the lining so its available for collection. i have also sent an sms to everyone to inform u guys of the collection details. So just give me a ring to arrange it. :smile:
as usual, i bought some spares just in case got anymore people who havent put their name down yet. So just leave a msg here or pm me to reserve.
to bro Bc23, can you please pm me your contact so that we can arrange a time for collection? Thanks. ;)
-
Final list
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11 (need 2 sets)
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. kwan
12. papajo82 (must show how to do it too cozz i'm totally blur in diy stuff )
13. robtan99 (need help in guidance too)
14. TonyChiam
-
Hi everyone. I have purchased the lining so its available for collection. i have also sent an sms to everyone to inform u guys of the collection details. So just give me a ring to arrange it. :smile:
as usual, i bought some spares just in case got anymore people who havent put their name down yet. So just leave a msg here or pm me to reserve.
to bro Bc23, can you please pm me your contact so that we can arrange a time for collection? Thanks. ;)
Hi Congan, you still have the spare linings? I would like to do this mod too, can also give me some guidance?
-
Hi Corgan, you still have the spare linings? I would like to do this mod too, can also give me some guidance?
sure thing bro. no problem. maybe you can pm me ur contact no first so we can arrange a collection time. ;)
-
Final list
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11 (need 2 sets)
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. kwan
12. papajo82 (must show how to do it too cozz i'm totally blur in diy stuff )
13. robtan99
14. TonyChiam
15. Lingofox
16. Nas
-
got 3-4 spare linings, so if u need them, pls contact me ya? ;)
-
got 3-4 spare linings, so if u need them, pls contact me ya? ;)
Hi Corgan,
can reserve 1 set for me? it's time to get rid of road noise.
-
Hi Corgan,
can reserve 1 set for me? it's time to get rid of road noise.
road noise not so much bah. but surrounding noise yes. :devil2: will reserve 1 for u. ;)
-
Final list
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11 (need 2 sets)
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. kwan
12. papajo82 (must show how to do it too cozz i'm totally blur in diy stuff )
13. robtan99
14. TonyChiam
15. Lingofox
16. Nas
17. Ntihoe
18. Alpha78
19. jerryslp
20. Hellomen
-
bro will collect from u asap .....busy wit work thks thks
-
bro will collect from u asap .....busy wit work thks thks
no issues bro. ;)
-
Bro Corgan, PM/contact me after your exams yah! I dun want to hinder you from scoring straight A's :yehyeh:. Good luck to ur exams
-
Bro Corgan, PM/contact me after your exams yah! I dun want to hinder you from scoring straight A's :yehyeh:. Good luck to ur exams
sure thing bro. ;)
-
Hi all bro/sis, pls do be carefully when installing this lining not say tat is not effective. If not install properly water will slip thru the door top frame during those jet wash at petrol station. This happen to my old ride during few times of car wash i see water slip thru both of my rear door. After i remove no more this water slip problem. Guess my diy skill not gd enough tat why pls do be carefully during installing dont want any bro/sis ended like me. My friend from mazda2 club they using another type of material those hard material not the foam insulation type tat i use.
Price for this MO is very attractive :thumbsup: coz i spent more then $20 in this :crycry:.
-
Hi all bro/sis, pls do be carefully when installing this lining not say tat is not effective. If not install properly water will slip thru the door top frame during those jet wash at petrol station. This happen to my old ride during few times of car wash i see water slip thru both of my rear door. After i remove no more this water slip problem. Guess my diy skill not gd enough tat why pls do be carefully during installing dont want any bro/sis ended like me. My friend from mazda2 club they using another type of material those hard material not the foam insulation type tat i use.
Price for this MO is very attractive :thumbsup: coz i spent more then $20 in this :crycry:.
you meant the rubber one??
anyway, I've done mine up since the first mo for this and water never seeps thru, tried and tested daily and mine is placed in between original door lining and the door itself. Till now my door needs to be closed harder as it provides an extra layer without deforming much and still with reduced road noise. Maybe someone else can try this method.
-
Hi all bro/sis, pls do be carefully when installing this lining not say tat is not effective. If not install properly water will slip thru the door top frame during those jet wash at petrol station. This happen to my old ride during few times of car wash i see water slip thru both of my rear door. After i remove no more this water slip problem. Guess my diy skill not gd enough tat why pls do be carefully during installing dont want any bro/sis ended like me. My friend from mazda2 club they using another type of material those hard material not the foam insulation type tat i use.
Price for this MO is very attractive :thumbsup: coz i spent more then $20 in this :crycry:.
thx for sharing ur experience bro. Anything that is not installed properly would have its problems. So my advice has always been to do it well instead of rushing it. ;)
i tried the hard material too. but found it too expensive and not cost efficient considering its effect. :(
just a disclaimer: the material i used is in no way related to best_ctz's lining
-
thx for sharing ur experience bro. Anything that is not installed properly would have its problems. So my advice has always been to do it well instead of rushing it. ;)
i tried the hard material too. but found it too expensive and not cost efficient considering its effect. :(
I want to disagree that the hard rubber type is not effective. No offence to anybody huh...
I got mine at autobacs, 21ft of 1cm width at $12. A good test of effectiveness is to check how the last door closes before and after the mod. The last door is always very difficult to close after the mod as if an invisible hand is stopping it. But if the window is wind down by a tiny gap, it will close with ease almost like before. This could be explained by air being trapped in the car and cannot escape when the door close and there is a compression of sort. So, it is not the rubber preventing the door from closing, but the air that is trapped in the cabin. The stock condition will allow air to escape through the gaps between the doors and frame, but not after the rubber lining is done.
Hope all understand my explanaton lah. All said, I think the hard rubber type should hv same effect as the lining promoted by Corgan. Maybe the durability will differ lah.
Cheers.
-
Everthing aside, i would appreciate if discussions can be kept strictly on my door lining on this thread. Everyone has their own view on the lining. Thanks.
-
I want to disagree that the hard rubber type is not effective. No offence to anybody huh...
I got mine at autobacs, 21ft of 1cm width at $12. A good test of effectiveness is to check how the last door closes before and after the mod. The last door is always very difficult to close after the mod as if an invisible hand is stopping it. But if the window is wind down by a tiny gap, it will close with ease almost like before. This could be explained by air being trapped in the car and cannot escape when the door close and there is a compression of sort. So, it is not the rubber preventing the door from closing, but the air that is trapped in the cabin. The stock condition will allow air to escape through the gaps between the doors and frame, but not after the rubber lining is done.
Hope all understand my explanaton lah. All said, I think the hard rubber type should hv same effect as the lining promoted by Corgan. Maybe the durability will differ lah.
Cheers.
thanks for your explanation in determing the effectiveness of the lining. I'm glad you liked ur hard rubber lining, it must have really worked well considering what u wrote in the earlier part of this thread suggesting the lining wouldnt improve the SP effect much. It just turns out that for me it didnt really worked out that well as i hoped. Regards.
attached a pic of the hard rubber lining i used just for those who are interested. $17 a roll. 4 doors would require about 5-6 rolls.
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb232%2Fforjononly%2FImage00451-1.jpg&hash=845aeb63d21de2f0d32b7ff90ef6b16f362800b1)
that would be the end of the discussion on the hard rubber lining. thanks.
-
Final list
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11 (need 2 sets)
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. kwan
12. papajo82 (must show how to do it too cozz i'm totally blur in diy stuff )
13. robtan99
14. TonyChiam
15. Lingofox
16. Nas
17. Ntihoe
18. Alpha78
19. jerryslp
20. Hellomen
Hi everyone, due to no. of orders this round, I have totally run out of linings. So if your name is listed in the list above, a set has been reserved for you. So no worries. ;)
If there are anybody else still interested, I would be conducting the 4th rd of grp buy after my exams. :smile:
-
Hi Bro Corgan,
Sorry tt still did not manage to arrange a suitable time to collect fr u. Being bz running around lately, the last time u sms me, i was in JB. Tmr Mon til fri whole week i ll b in KL/Penang, so will ctc u again when i m back to sg.
Thanks again.
-
Hi Bro Corgan,
Sorry tt still did not manage to arrange a suitable time to collect fr u. Being bz running around lately, the last time u sms me, i was in JB. Tmr Mon til fri whole week i ll b in KL/Penang, so will ctc u again when i m back to sg.
Thanks again.
no issues bro. ;) just let me know when u free.
-
thanks for your explanation in determing the effectiveness of the lining. I'm glad you liked ur hard rubber lining, it must have really worked well considering what u wrote in the earlier part of this thread suggesting the lining wouldnt improve the SP effect much. It just turns out that for me it didnt really worked out that well as i hoped. Regards.
attached a pic of the hard rubber lining i used just for those who are interested. $17 a roll. 4 doors would require about 5-6 rolls.
(https://www.sgnissan.com/forum/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb232%2Fforjononly%2FImage00451-1.jpg&hash=845aeb63d21de2f0d32b7ff90ef6b16f362800b1)
that would be the end of the discussion on the hard rubber lining. thanks.
First of all, I would not have commented if hard-rubber type lining has not been tainted. My FR now is that it works. I am not out to sabo ur lobang or whatever. I also appreciate ur effort in helping fellow lations.
Secondly I objected to ur cost quoting as above. It gave ppl an impression doing for a latio will cost $17x5-6 = $80 to 102.
Far from it. The hard-rubber lining I bought cost me only $12 and is enough to do for more than 2 cars (72fts or 21.6meters). (previously I quoted 21fts. My mistake. It should be 21meters). You might have got an expensive one but it does not mean that all are that expensive. Please go to bukit batok autobacs to confirm this pricing if you are interested.
I hope the mods will not delete this posting as I am just clarifying some mis-conception. I am not expecting this kind of reaction as I am just being helpful. :zipped:
-
First of all, I would not have commented if hard-rubber type lining has not been tainted. My FR now is that it works. I am not out to sabo ur lobang or whatever. I also appreciate ur effort in helping fellow lations.
Secondly I objected to ur cost quoting as above. It gave ppl an impression doing for a latio will cost $17x5-6 = $80 to 102.
Far from it. The hard-rubber lining I bought cost me only $12 and is enough to do for more than 2 cars (72fts or 21.6meters). (previously I quoted 21fts. My mistake. It should be 21meters). You might have got an expensive one but it does not mean that all are that expensive. Please go to bukit batok autobacs to confirm this pricing if you are interested.
I hope the mods will not delete this posting as I am just clarifying some mis-conception. I am not expecting this kind of reaction as I am just being helpful. :zipped:
Are you sure you are talking about the same item as what bro corgan posted? Packaging and etc does it look the same as the one from autobacs?
-
First of all, I would not have commented if hard-rubber type lining has not been tainted. My FR now is that it works. I am not out to sabo ur lobang or whatever. I also appreciate ur effort in helping fellow lations.
Secondly I objected to ur cost quoting as above. It gave ppl an impression doing for a latio will cost $17x5-6 = $80 to 102.
Far from it. The hard-rubber lining I bought cost me only $12 and is enough to do for more than 2 cars (72fts or 21.6meters). (previously I quoted 21fts. My mistake. It should be 21meters). You might have got an expensive one but it does not mean that all are that expensive. Please go to bukit batok autobacs to confirm this pricing if you are interested.
I hope the mods will not delete this posting as I am just clarifying some mis-conception. I am not expecting this kind of reaction as I am just being helpful. :zipped:
I'm just wondering, during my postings, have i said anything about your lining or how effective or ineffective it is? Maybe you interpreted my personal experience as a general comment on your hard rubber lining, Having said so, i have edited my previous posting so that people would not get mixed up.
In the first place, I already pointed out in that its was my own personal experience with it and no way did i discourage anyone from using it. I also quite clearly pointed out in my reply to you, what material i was using and how much it would have cost to do up all four doors. I even posted up a picture of it for reference. so the price i quoted was for THE lining i displayed in the picture, and not other stuff.
I'm definitely open to the idea of trying new stuff to improve our rides, but maybe the next time you try to put your point across, try a bit of tact. I guess thats all i have to say.
to mods: feel free to delete my posts if you feel they are not appropriate. Thanks.
-
Final list
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11 (need 2 sets)
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. kwan
12. papajo82
13. robtan99
14. TonyChiam
15. Lingofox
16. Nas
17. Ntihoe
18. Alpha78
19. jerryslp
20. Hellomen
some of you havent collected from me yet so just give me a sms or ring to arrange a timing ya? ;)
-
bro corgan, is the new material better. I feel that the current one like no effect anymore cos it like too deformed liao. Become thinner and thinner. If it good may consider getting from u. :smile:
-
bro corgan, is the new material better. I feel that the current one like no effect anymore cos it like too deformed liao. Become thinner and thinner. If it good may consider getting from u. :smile:
hmm.. the new material i tried is $17 a roll.. not enough for a door.. might be a bit on the expensive side... effect wise shld be the same.. u wanna try? i can tell u where to get. ;)
-
thks bro for demo to me how to install the lining and the air con pipe stuff ......nice chatting wit u ..........ur hs there chicken rice veri nice wor see ya ard soon :yehyeh:
-
thks bro for demo to me how to install the lining and the air con pipe stuff ......nice chatting wit u ..........ur hs there chicken rice veri nice wor see ya ard soon :yehyeh:
no prob bro. :D nxt time can come over makan lo.
i only just finished washing my car only. :out: :D
-
no prob bro. :D nxt time can come over makan lo.
i only just finished washing my car only. :out: :D
ya la ur car really dirty man .......i just fix u the rest of the door only ....gd feeling enjoy my ice more liao hahaha
-
Final list
1. Revin81
2. kitchai
3. Archie_baby
4. Pest11 (need 2 sets)
5. Znie (need 2 sets)
6. mydotcom
7. bc23 (3 sets)
8. greymonster
9. Nick (2 sets)
10. lyh1280
11. kwan
12. papajo82
13. robtan99
14. TonyChiam
15. Lingofox
16. Nas
17. Ntihoe
18. Alpha78
19. jerryslp
20. Hellomen
some of you havent collected from me yet so just give me a sms or ring to arrange a timing ya? ;)
-
Just tried out on my driver door, by putting the tape on the recommended position. The door can't be closed no matter how hard i slam. I need to slam with my hand on the handle. Material seems a bit too thick.
Now I put in another position, the door can be slammed close without forcing, ie, push the door hard and it will close tight, no need to use hand to follow through.
Have to hear the wind noise tomorrow, whether the way I stick the tape has any effect. Thanks Corgan for your group buy effort.
-
Just tried out on my driver door, by putting the tape on the recommended position. The door can't be closed no matter how hard i slam. I need to slam with my hand on the handle. Material seems a bit too thick.
Now I put in another position, the door can be slammed close without forcing, ie, push the door hard and it will close tight, no need to use hand to follow through.
Have to hear the wind noise tomorrow, whether the way I stick the tape has any effect. Thanks Corgan for your group buy effort.
that jia lat ah :D but give it a while.. will season out then shld be fine liao... one thing u can try is to close the door with the window down a little. It will help to reduce the force needed to close the door. ;) cos the air inside can escape easier.
-
Yup. It's not so much of trapped air cannot come out that causes door closing to be difficult. When the door is slammed and the gap is about 10cm, the edge nearer the wheel arch would have been in contact with the tape, and there's a bouncing effect.
Now I'm wondering if I should break the double sided tape and stretch the material to make it thinner. That means I need to buy additional double sided tape to cover the gaps introduced by the stretch.
-
Yup. It's not so much of trapped air cannot come out that causes door closing to be difficult. When the door is slammed and the gap is about 10cm, the edge nearer the wheel arch would have been in contact with the tape, and there's a bouncing effect.
Now I'm wondering if I should break the double sided tape and stretch the material to make it thinner. That means I need to buy additional double sided tape to cover the gaps introduced by the stretch.
ic. i i get what u mean now. if the material hasnt set yet. can jus remove it slowly and stretch it again before applying it.
-
Tried stretching just now on the front passenger door. Didn't work well. Broke off a small piece, and the rest I broke the double sided tape. Some more it didn't stick too well.
Took a second look at the driver side door which I did last night, it managed to close easily after parking a full day under the sun at the office. Spots on the tape that were too cramped have moulded into shape. Decided not to redo the driver door after all, and wind noise is still reduced substantially.
For the rear doors, I stuck the tape right beside the inner rubber lining along the door frame, which helps the doors to close without very much increased effort. Hopefully tomorrow after baking the car under the sun, all 4 doors will be moulded correctly.
Thanks again Corgan for dropping by my office. :thumbsup:
-
no problem bro. ;) didnt help much also. as long can feel effect :thumbsup: le
-
;) here i am ..
Bro .. like you mentioned ..
Do you still have anymore of the SP material?
-
;) here i am ..
Bro .. like you mentioned ..
Do you still have anymore of the SP material?
I currently do not have stock. But I remember bro Hellomen also needed 2 pieces. You might want to add your name below so once I can get enough orders I can get them for you guys.
-
Ppl interested, please leave your nick and pm me your contact number ;)
1.
2.
3.
4.
5.
6.
7.
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2.
3.
4.
5.
6.
7.
-
Hi corgan,
Is there still got any things we can DIY ourself?
-
there is some things you can DIY, some examples would be interior lights and soundproofing which I have tried.
If you can think of more, no harm sharing it on a new thread so we can try it out.
-
Hi Corgan,
But DIY soundproofing is very dangerous cause no know how to take out scare spoilt the roof.
-
i did diy sound proofing for my last car, very extensive some more. 4 doors, boot and wheel well, all wheel arcs and floor pan (yes i remove all the seats).
not that difficult, but very tiring and exhaustive. my previous ride is a Mazda 2 SP. few months after i done my SP, i sold off the car for my current latio..... faintz.
the only thing i have not done is the roof, cause it gets noisy only when it rains very heavily. but the chances that its raining very heavily and i am on the road is slim
-
Hi Corgan,
But DIY soundproofing is very dangerous cause no know how to take out scare spoilt the roof.
thats true.. but I'm lucky my roof SP went ok.. with the help from a few bros here ;)
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3.
4.
5.
6.
7.
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. blackspotGG - 2 rolls
4.
5.
6.
7.
-
thats true.. but I'm lucky my roof SP went ok.. with the help from a few bros here ;)
Corgan, any news on this?
Happy New Year
-
Corgan, any news on this?
Happy New Year
Hi, just wonder after DIY the door lining
The doors may be hard to close no matter how hard you slam. not sure if the
lining material is thick.
cheers
-
Have not done it myself .. but since it is an inexpensive modification, no harm trying.
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3.viosy 4 doors
4.
5.
6.
7.
-
Hi all. SOrry for the late late reply.
Anyway, new batch of lining shld be in by 1st week march.
cheers!
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. viosy 4 doors
4. leolooi - one set (You got PM Bro)
5.
6.
7.
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. viosy 4 doors
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets
6.
7.
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. viosy 4 doors
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets
6. Ender
7.
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. viosy 4 doors
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets
6. Ender
7. Symbolic - 2 sets ( for 2 front doors ? )
Thks - Symbolic
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. viosy 4 doors
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets
6. Ender
7. Symbolic - 2 sets ( for 2 front doors ? )
8. totallypatrick (4 doors)
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. viosy 4 doors
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets
6. Ender
7. Symbolic - 2 sets ( for 2 front doors ? )
8. totallypatrick (4 doors)
9. walker (4 doors)
-
Dear Ladies (if any) and Gents,
The lining will be in this saturday morning. Sorry for the delay as I had a last minute matter to attend to.
-
Hi Bro Corgan,
This Saturday DIY door lining at where and wat time huh ? Trying to juggle schedule......
Thanks
Symbolic
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. viosy 4 doors
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets
6. Ender
7. Symbolic - 2 sets ( for 2 front doors ? )
8. totallypatrick (4 doors)
9. walker (4 doors)
10. Znie - 2 Sets
-
Hi Bro Corgan,
This Saturday DIY door lining at where and wat time huh ? Trying to juggle schedule......
Thanks
Symbolic
will be at amk area.
-
the linings are in. please pm me for details where to collect. Thanks. ;)
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. viosy 4 doors
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets collected
6. Ender
7. Symbolic - 2 sets ( for 2 front doors ? )
8. totallypatrick (4 doors)
9. walker (4 doors)
10. Znie - 2 Sets
btw, the price is still $10 :D
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. viosy 4 doors
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets collected
6. Ender
7. Symbolic - 2 sets ( for 2 front doors ? )
8. totallypatrick (4 doors)
9. walker (4 doors)
10. Znie - 2 Sets
11. komson - 2 sets
btw, the price is still $10
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2sets
2. keigo
3. viosy 4 doors
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets collected
6. Ender
7. Symbolic - 2 sets ( for 2 front doors ? )
8. totallypatrick (4 doors)
9. walker (4 doors)
10. Znie - 2 Sets
11. komson - 2 sets
12. Thomas - 4 doors
btw, the price is still $10
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets collected
6. Ender
7. Symbolic - 2 sets ( for 2 front doors ? )
8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
btw, the price is still $10 and its 1 set for 4 doors. ;)
-
Hi Bro Corgan,
Ok, then I nid only 1 set ( for 4 doors ), how to arrange/contact u to self-collect, 'cos this day my work schedule v unstable.
Thanks
Symbolic
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets collected
6. Ender
7. Symbolic - 2 sets ( for 2 front doors ? )
8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
13. latioboy - 1 set
btw, the price is still $10 and its 1 set for 4 doors. ;)
-
Hi Bro Corgan,
Ok, then I nid only 1 set ( for 4 doors ), how to arrange/contact u to self-collect, 'cos this day my work schedule v unstable.
Thanks
Symbolic
u got pm bro. ;)
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets collected
6. Ender - 1 set
7. Symbolic - 1 set
8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
13. latioboy - 1 set
btw, the price is still $10 and its 1 set for 4 doors. ;)
-
for bros/sis who left their nick down, dont worry. I will keep the set for you till you get it from me. Just let me know when. ;)
-
for bros/sis who left their nick down, dont worry. I will keep the set for you till you get it from me. Just let me know when. ;)
thks bro kinda busy recently will try to get from u this wednesday night is it ok? i will sms u again. :)
-
thks bro kinda busy recently will try to get from u this wednesday night is it ok? i will sms u again. :)
oh. Bro you didnt leave your nick down?
Lucky you replied.
Wednesday might be tough unless you can collect late. I got company dinner function to attend. Maybe this friday at the meetup?
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets collected
6. Ender - 1 set
7. Symbolic - 1 set
8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
13. latioboy - 1 set
14. Kanzo - 1 set
btw, the price is still $10 and its 1 set for 4 doors. ;)
Think I have just 1-2 spare set left. ;)
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets collected
6. Ender - 1 set
7. Symbolic - 1 set
8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
13. latioboy - 1 set
14. Kanzo - 1 set
15. Robtan99 - 1 set (still avilable or not)
btw, the price is still $10 and its 1 set for 4 doors. ;)
Think I have just 1-2 spare set left. ;)
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
4. leolooi - one set (You got PM Bro)
5. xman 13 - 2 sets collected
6. Ender - 1 set
7. Symbolic - 1 set
8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas (kanzo)- 1 set
13. latioboy - 1 set
btw, the price is still $10 and its 1 set for 4 doors. ;)
Think I have just 1-2 spare set left. ;)
i did bro.. :)
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
5. xman 13 - 2 sets collected
6. Ender - 1 set
7. Symbolic - 1 set8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
13. latioboy - 1 set
14. Kanzo - 1 set
15. Robtan - 1 set
btw, the price is still $10 and its 1 set for 4 doors. ;)
Currently no spares already. If someone gives up theirs, I will put it up.
-
Hi Bro Corgan,
Paiseh, jus now disturb u while u having Co dinner.....
It was great to meet up with u and your quick tips on DIY door lining sure has given me good confident to DIY.
Next time, hope got chance we drink Kopi, ok ? :D :D
Cheers !
Symbolic
-
No problem bro. ;) I needed a walk after the buffet too. :D
If you got other ideas for DIY, can share too.
Let me know when we can get Kopi. Weekday nites easier. :thumbsup:
-
Hi Bro Corgan,
Sure, still tinking of some DIY stuffs to do.
Let u know if got any.
So u wan Kopi or Kopi-O, huh ?
Cheers !
Symbolic
-
dear all, currently no more stock. Let me finish this batch first and we' ;)
-
Hi Corgan
Count me in for the next batch.
1) JazONtheMOVE
Cheers
-
Hi Corgan
Count me in for the next batch.
1) JazONtheMOVE
2) gh05tss
Cheers
-
Hi Corgan
Count me in for the next batch.
1) JazONtheMOVE
2) gh05tss
3) maverick1975
Cheers
-
Hi Corgan
Count me in for the next batch.
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
Cheers
-
bro.. count me in as well.
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
-
Ppl interested, please leave your nick and pm me your contact number
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
5. xman 13 - 2 sets collected
6. Ender - 1 set
7. Symbolic - 1 set8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
13. latioboy - 1 set
14. Kanzo - 1 set
15. Robtan - 1 set
btw, the price is still $10 and its 1 set for 4 doors. ;)
Currently no spares already. If someone gives up theirs, I will put it up.
-
bro.. count me in as well.
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
once it hit 10 orders, I will go get it for you guys ya? ;)
-
Long time no post... mi want lining! :D
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
-
Count me in! Cause TCM did nuts to my complaint.
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
-
Do count me in too :smile:
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
-
Count me in...
Thks.
-
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
9) HJB
-
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
9) HJB
10) RedRedWine
-
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
9) HJB
10) RedRedWine
11) totallypatrick for my friend :)
-
hope it worked for you thats why your friend is getting it. :D
-
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
9) HJB
10) RedRedWine
11) totallypatrick for my friend :)
Hi people, I will get the lining for you guys asap. ;)
-
hope it worked for you thats why your friend is getting it. :D
yeah.. but his is altis. dunno enough or not.. but heck lah.. he wants just buy for him
-
yeah.. but his is altis. dunno enough or not.. but heck lah.. he wants just buy for him
shld be enough. I saw an altis do it up with the same roll. no problem. ;)
-
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
9) HJB
10) RedRedWine
11) totallypatrick for my friend :)
Hi people, I will get the lining for you guys asap. ;)
Thanx Corgan, hope to collect from you real soon...
-
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
9) HJB
10) RedRedWine
11) totallypatrick for my friend :)
12) mydotcom
-
any news?
-
getting the stock this sat. ;)
-
getting the stock this sat. ;)
bro
i have pm u my hp..msg me when u free for me to pick up after you have collected.. thanks man..
-
dear all... second batch of lining is in. can collect from me at my place. contact me at 94356959 for more details. thks. ;)
-
hi bro corgan,
any xtra stock im interested.
-
first batch
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
5. xman 13 - 2 sets collected
6. Ender - 1 set
7. Symbolic - 1 set8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
13. latioboy - 1 set
14. Kanzo - 1 set
15. Robtan - 1 set
2nd Batch
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
9) HJB
10) RedRedWine
11) totallypatrick for my friend :)
12) mydotcom
please contact me at 94356959 for collection details.. ;)
-
hi bro corgan,
any xtra stock im interested.
still have bro. I bought extra in case anyone else wants it. Just contact me to arrange collection. ;)
-
still have bro. I bought extra in case anyone else wants it. Just contact me to arrange collection. ;)
Thanks Corgan for the order, just installed this weekend and it really seems like a vacuum..
anyway will let you know if i need more as my friends will be trying out my ride after installation..
-
Thanks Corgan for the order, just installed this weekend and it really seems like a vacuum..
anyway will let you know if i need more as my friends will be trying out my ride after installation..
hi
do u hv any difficulties closing the door after installation? :confused1: hv to slam a few time b4 it can close?
-
Thanks Corgan for the order, just installed this weekend and it really seems like a vacuum..
anyway will let you know if i need more as my friends will be trying out my ride after installation..
np bro ;)
-
hi
do u hv any difficulties closing the door after installation? :confused1: hv to slam a few time b4 it can close?
give it 3-4 weeks. shld be easier to close after that.. ;)
-
yes had difficulties this few days closing but i believe everybody who has installed it has the same problem initially as the lining hasnt been compressed to its final state yet.. should take about 2-3weeks..
-
bro corgan, will you be attending the monthly meetup?
-
bro corgan, will you be attending the monthly meetup?
yes. very likely. barring any last min work. ;)
-
first batch
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
5. xman 13 - 2 sets collected
6. Ender - 1 set
7. Symbolic - 1 set8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
13. latioboy - 1 set
14. Kanzo - 1 set
15. Robtan - 1 set
2nd Batch
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
9) HJB
10) RedRedWine
11) totallypatrick for my friend :)
12) mydotcom
please contact me at 94356959 for collection details.. ;)
-
Hi corgan,
I will collect the thing from u next week
Having exam this week so not convenience to go downn
So sorry
-
no problem bro. ;)
I have exactly 21 rolls left now. Will keep for those who left their names here, the rest will be first come first serve.
-
no problem bro. ;)
I have exactly 21 rolls left now. Will keep for those who left their names here, the rest will be first come first serve.
hi bro, pls keep 1 set for me. do you install? thks
-
hi bro, pls keep 1 set for me. do you install? thks
Installation is DIY. Its very easy. Will keep one set for you then. ;)
-
Corgan, will collect mine from you next week..leaving for Vietnam tml morning.
Sorry...almost forget mine.
-
no problem bro. ;)
I have exactly 21 rolls left now. Will keep for those who left their names here, the rest will be first come first serve.
bro i am interested. how to get from you?
-
bro i am interested. how to get from you?
just contact me at 94356959 to arrange
-
Corgan, will collect mine from you next week..leaving for Vietnam tml morning.
Sorry...almost forget mine.
no prob bro. Just let me know when. ;)
-
no prob bro. Just let me know when. ;)
Thanks bro.
-
Installation is DIY. Its very easy. Will keep one set for you then. ;)
thks bro, i'd yet receive my car, jus got my bid yesterday only.. :smile: probably 2-3weeks time, is it ok for u?
-
How muchie ? I roll enuff for all 4 doors ? :D
-
yup. 1 roll enough 4 doors..
who interested just leave ur name in the list. ;)
-
How muchie ? And where is the collection place ?
-
its $10 for a roll. sms me for collection details.
-
first batch
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
5. xman 13 - 2 sets collected
6. Ender - 1 set
7. Symbolic - 1 set8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
13. latioboy - 1 set
14. Kanzo - 1 set
15. Robtan - 1 set
2nd Batch
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
9) HJB
10) RedRedWine
11) totallypatrick for my friend :)
12) mydotcom
13) Jazz (Pasir Ris) :D
please contact me at 94356959 for collection details..
-
first batch
1. pest11 - 2 sets
2. keigo - 1 set
3. viosy - 1 set
5. xman 13 - 2 sets collected
6. Ender - 1 set
7. Symbolic - 1 set8. totallypatrick - 1 set
9. walker - 1 set
10. Znie - 2 Sets
11. komson - 2 sets collected
12. Thomas - 1 set
13. latioboy - 1 set
14. Kanzo - 1 set
15. Robtan - 1 set
2nd Batch
1) JazONtheMOVE
2) gh05tss
3) maverick1975
4) bigblooo
5) yewsin85
6) NotYetz
7) gracieg
8) aH_gUAn
9) HJB
10) RedRedWine
11) totallypatrick for my friend :)
12) mydotcom
14. Jazz
15. Law
please contact me at 94356959 for collection details.. ;)
-
just a reminder guys, please contact me at 94356959 for collection ;)